Haotian 100W JPT MOPA Fiber Laser Engraver

The Production Investment. Two Sources — One for Metals, One for When Glass Matters. The Haotian JPT MOPA 100W carries two source variants: the JPT M7 M-version and the JPT M8 M-version. Both deliver 100 watts of MOPA fiber laser power with the full application set: deep engraving, color marking, anodized aluminum blackening, and thin metal cutting. The decision between them comes down to one question: is glass drilling or 2.5D mold cavity work part of your business? Compatible Materials: Metal Plastics Stone Leather Rubber What 100W Changes in Real Production The 60W MOPA is an excellent machine. The 100W does everything it does — just faster and with more material removal per pass on deep work. A deep engraving job that takes 10 hours at 60W takes approximately 5 hours at 100W. That's not a marketing claim — it's a direct consequence of 67% more average power applied to material removal. For shops where deep engraving is daily work, that throughput difference is the entire business case. Beyond deep engraving, the 100W handles thin metal cutting up to approximately 1.5mm (vs. ~0.5–0.8mm at 60W) and maintains the full MOPA color spectrum across both source variants. All 100W configurations include quartz F-theta lenses — required at this power level because standard glass lenses develop thermal lensing under sustained high-power load and shift focal length progressively during long jobs. What 100W doesn't do: Glass drilling without the M8 source, powder-coated tumblers (CO2 galvo), wood/leather/acrylic (CO2 laser), sheet metal cutting above ~1.5mm. The Two 100W Sources — The M7 vs. M8 Decision JPT MOPA M7 (M-version) JPT MOPA M8 (M-version) Source generation M7 — proven, field-tested at scale M8 — latest generation, higher peak power optimization Beam quality (M²) Below 1.6 Below 1.5 Peak power ~100 kW+ 100 kW+ (optimized) Pulse width range 2–500 ns 6–200 ns Color marking on stainless/titanium Yes — full spectrum Yes — full spectrum Deep engraving on metals Excellent Excellent Thin metal cutting Up to ~1.5mm Up to ~1.5mm Glass drilling No Yes — requires G3 PRO 2.5D galvo + EZCad3 2.5D mold cavity work Limited Yes — full layer-by-layer Z control Galvo software EZCad 2 / LightBurn EZCad3 (with 2D LightBurn compatible) Cooling Water cooled (chiller included) Water cooled (chiller included) Price Lower $3,300 premium over M7 The honest call: If your work is metals — deep engraving, color marking, firearm marking, knife work, jewelry, industrial traceability — the M7 is the right machine and the M8 premium doesn't earn back. The M8 is the correct choice if glass drilling, borosilicate labware processing, or 2.5D mold cavity work is a genuine business requirement. Don't pay the M8 premium for work the M7 handles equally well. What's Included — Complete Working System Every 100W configuration ships complete: JPT MOPA source at your selected variant (M7 M-version or M8 M-version) Sino-Galvo SG7110 high-speed scanning head with dual red-dot positioning (M7) or G3 PRO 2.5D galvo with integrated EZCad3 (M8) Two quartz F-theta lenses of your choice — 70×70, 110×110, 150×150, 175×175, 210×210, or 300×300 mm Rotary attachment — D60 (rings/bracelets), D80 (cups/tumblers up to 70mm), or D100 (larger tumblers up to 90mm) Motorized Z-axis Foot pedal for hands-free triggering OD5+ laser safety glasses EZCad 2 original software on USB (M7) or EZCad3 (M8) Industrial water chiller (included) Fixed aluminum worktable Free DDP shipping to the US, Canada, and EU. Approximately 30 days delivery. 3-Year Warranty — And Why That Number Actually Matters Both 100W variants carry 3 years of full coverage on the JPT source and the complete machine — including the galvo head, water chiller, motorized Z-axis, and all electronics. This is 2–3× longer than the 1-year warranty common on competing fiber lasers at this price point. For a production shop where the 100W is running daily and deep engraving throughput directly affects revenue, a chiller failure or galvo fault in month 20 on a 1-year warranty machine is an out-of-pocket cost and a production stoppage. On the Haotian, it's a replacement part with all shipping covered. The Maker's Chest Difference USA-based technical support by phone and email — Chiller setup, EZCad 2/3 and LightBurn configuration, deep engraving parameter development, troubleshooting. Pre-sale guidance — Deciding between M7 and M8, or between 100W and 120W? Talk to us before ordering. Frequently Asked Questions Q: Does the 100W really run 50% faster than the 60W on deep engraving? Yes, approximately. The relationship is roughly linear with average power on material removal: 100W ÷ 60W = 1.67×, so you get ~50–67% faster deep engraving cycle times. The exact improvement varies by material, depth, and pass strategy, but the order of magnitude is accurate. For a shop running deep engraving daily, this is the difference between 6-hour jobs and 4-hour jobs across every batch. Q: What's the pulse width range difference between the M7 (2–500 ns) and M8 (6–200 ns)? The M8's shorter minimum pulse width (6 ns vs. 2 ns) and the architecture differences that enable peak powers above 100 kW are what allow it to vaporize glass. At the 6–200 ns range, the M8 still covers the full MOPA color marking range on stainless and titanium and handles all standard metal engraving applications. The 2–500 ns range of the M7 is slightly wider on both ends but the practical difference on everyday metal work is minimal. Q: Is glass drilling available on the M7 at any power level? No. Glass drilling requires the M8 source architecture, the G3 PRO 2.5D galvo head, and EZCad3 software working together. The M7 source at any wattage will crack glass before it marks it due to the different pulse characteristics. If glass is on your material list, the M8 is non-optional. Q: Why does the 100W require water cooling when the 80W doesn't? At average output power above approximately 80–100W, heat dissipation during continuous production operation exceeds what air cooling can handle without thermal drift in the laser source. The water chiller maintains stable source temperature, preventing beam quality degradation during long runs. The chiller is included in the machine package. Q: How do I set Z-axis height? Is the motorized Z standard? The 100W includes a motorized Z-axis as standard. You set focal height by pressing the up/down buttons to raise or lower the laser head until the dual red-dot pointers converge on your material surface. You can save focus heights for different materials in your parameter library for fast job changeovers. Q: Can I use LightBurn? M7: Yes — the JCZ control board is fully compatible with LightBurn galvo mode on Windows, macOS, and Linux. EZCad 2 Original is also included. M8: EZCad3 is the primary software (included, with the controller integrated into the G3 PRO galvo head). LightBurn is compatible for standard 2D marking work on the M8 as well. Q: Does Haotian offer returns? Haotian is an exception to our standard Return Policy — we're unable to accept returns on Haotian products. This is for two reasons, the first one being that each order is built to spec once placed. Combined with the high cost of return shipping to China, along with duties and other fees make returns impractical for both us and our customers. Because of this, our team is happy to answer any questions before you purchase — we want to make sure what you're ordering fully meets your needs before you commit. We are also available post purchase to answer any unknowns that might come up, and resolve those to your satisfaction. Specifications Haotian 100W JPT MOPA Fiber Laser Engraver Specifications: Laser Source JPT M7 MOPA (Master Oscillator Power Amplifier) Average Output Power 100W Maximum Pulse Energy 1.5 mJ Peak Power Over 100 kW Pulse Width Range 2 to 500 ns (independently adjustable) Pulse Frequency Range 1 to 4,000 kHz (independently adjustable) Wavelength 1064 nm Beam Quality (M²) Less than 1.6 Beam Diameter 7 ± 0.5 mm Galvo Scanning Head SG7110 - high-speed, silicon mirror Maximum Marking Speed Up to 10,000 mm/s Lens Type Quartz F-theta lens (required for 80W+) Available Lens Sizes 70×70, 110×110, 150×150, 175×175, 200×200, 300×300 mm Z-Axis Motorized (button-controlled up/down) Controller EZCad 2 Original with JCZ control board Software Compatibility EZCad 2, LightBurn (Windows, macOS, Linux) Supported File Formats AI, DXF, DST, PLT, BMP, JPG, GIF, PNG, TIF, SVG, and more Cooling System Air cooled (no external chiller needed) Power Supply 48VDC | 110V-240V / 50-60Hz input Laser Source Lifespan Over 100,000 hours (over 11 years continuous) Machine Body 100% aluminum cover (custom colors available) Deep Engraving Depth Up to 1.0 mm on metals (material dependent) Thin Metal Cutting Up to 1.5 mm brass/aluminum, up to 0.5 mm steel Engraving Distortion Less than 1% Warranty 3 years on laser source and full machine Shipping Free worldwide - DDP to US, Canada, EU (30 days) Warranty & Manuals Haotian 100W JPT MOPA Split Fiber Laser Engraver Warranty Details: Haotian JPT MOPA Fiber Laser comes with a 3-year warranty on the laser engraving machine (excluding consumables / shipping). Dedicated, local US-based support for quick answers to questions. Haotian 100W JPT MOPA Split Fiber Laser Product Manuals: Click the links below to download product manuals for the Haotian JPT MOPA Fiber Laser Engraver. Haotian 100W JPT MOPA Split Fiber Product Manual Downloads: Haotian 100W JPT MOPA Split Fiber Product Manual Download