Simple Stat Thermostat GYPR

GYPR Thermostat Simple Stat 1000W Ideal for basic temperature control of heat lights, heat mats and heat cables. The Get Your Pet Right Simple Stat makes temperature control easy. Reptiles and amphibians are ectotherms and rely on external sources of heat to survive. In captivity, providing optimal temperatures inside a reptile's enclosure is crucial for their health and well-being. Thermostats allow for a specific temperature (appropriate for the species being housed) to be controlled and regulated. The Simple-Stat is a basic, on/Off Thermostat providing accurate temperature control when paired with a range of heating devices, including low-wattage heat globes, heat mats and heat cables. The simple-stat is the perfect beginner thermostat for new reptile keepers or those seeking an affordable and easy-to-program device. Size of Thermostat (Excluding power cables) 7.5 cm L x 4 cm W x 12 cm H Main Features: Maximum Load: 1000w Maximum Amps: 4.5A. Input & Output voltage: 240V. Temperature is set in one-degree increments. 24-hour temperature control. Temperature display range: 0-60 degrees Celsius. Memory setting saves the current programming even when the Simple-Stat is switched off. Includes power and load indicator lights. Includes a three-pronged grounded electrical plug. Compatible with: Heat cord - 10-180 WATT and above Heat light - 40-100 WATT Heat mat - 5-35 WATT and above Can be used with: GYPR 5Watt. 7Watt, 17Watt Heat Mat w' controller GYPR 50Watt, 75Watt, 100Watt, Day Basking Light GYPR 50Watt, 75Watt, 100Watt, Infrared Light GYPR 50Watt, 75Watt, 100Watt, Purple Moon Light GYPR 50Watt, 75Watt, 100Watt, Splash Proof Light Especially for GYPR Python Starter Kit DO NOT USE WITH MERCURY VAPOUR BULB SET UP: Get Your Pet Right Simple-Stat: 1. Plug your Get Your Pet Right heat mat, heat cord or heat light into the Simples-Stat. 2. Plug your Simple-Stat into a power source and switch on. The LED screen will light up. Place the thermostat probe inside the terrarium at the basking spot where the set temperature will be regulated. 3. Using the UP and DOWN buttons, set the desired temperature for the species being kept PROGRAMMING THE SIMPLE-STAT 1. Press the SET button to display the current preset temperature. The LED screen shows the current temperature whenever the SET button is not activated. 2. Press and hold the SET button for three seconds to enter temperature selection mode. Press the UP and DOWN buttons to adjust the temperature. When the LED screen is lit up, the heating device is in the process of warming the enclosure. When the LED screen is not lit, the heating device is not heating, allowing the enclosure to cool down. The Simple-Stat will automatically switch off the heating device once the set temperature is reached. 3. Press and hold the DOWN button for three seconds to display the temperature in CELSIUS. Press and hold the UP button to display the temperature in FAHRENHEIT. You Tube SIMPLE-STAT ON/OFF THERMOSTAT 1000W MAX Disclaimer: Do not depend on information on this page, as it may have errors or be outdated. Please read and follow the instructions on the product's physical packaging before use.