02E927770AM / 02E325025AM Complete Mechatronics DSG 6 DQ250 | Used
02E927770AM / 02E325025AM Complete Mechatronics DSG 6 DQ250 Used Part Numbers: 02E927770AM / 02E325025AM Used complete mechatronics unit for 6-speed DSG DQ250 transmission with TCU and hydraulic valve body Transmission Type DSG 6 DQ250 Condition Used Fully Functional Component Complete Mechatronics Unit Manufacturer Temic (OEM) Clutch Type Wet Clutch (up to 400 Nm) Warranty 12 Months Complete Mechatronics – TCU + Hydraulic Block + Valves This is a used fully functional complete mechatronics unit for 6-speed DSG DQ250 transmissions. The assembly includes both the electronic control unit (TCU) and the integrated hydraulic valve body with control solenoids and sensors. OEM Part Numbers Main OEM Numbers: 02E927770AM • 02E325025AM Related Mechatronics References: 02E927770AD • 02E927770AE Related Hydraulic Block References: 02E325025 • 02E325025AD • 02E325025AE • 02E325025AJ • 02E325025AL • 02E325025AM • 02E325025AN • 02E325025AO • 02E325025AQ • 02E325025AR • 02E325025AS • 02E325025AT Always Verify the Exact Part Number Before ordering, compare the OEM number on your original mechatronics unit with 02E927770AM / 02E325025AM or related references. For many vehicles, correct operation also requires cloning, software transfer or loading the proper program and VIN-specific data. Technical Specifications Transmission Type: 6-Speed DSG DQ250 System: 02E DQ250 Component: Complete Mechatronics Unit (TCU + Valve Body) Manufacturer: Temic (OEM Supplier) Main Part Numbers: 02E927770AM / 02E325025AM Included: TCU, hydraulic block, solenoids, sensors and internal wiring Condition: Used - Tested Fully Functional Clutch Type: Wet Clutch DSG System Torque Range: For DQ250 applications up to 400 Nm Installation: Professional installation / programming / adaptation recommended Warranty Period: 12 Months Product Description This is a used fully functional complete mechatronics unit for 6-speed DSG DQ250 transmissions. The assembly includes both the electronic control unit (TCU) and the integrated hydraulic valve body with control solenoids and sensors, as a complete replacement solution for selected VW Group vehicles. What This Mechatronics Unit Includes Complete mechatronics assembly for DSG 6 DQ250 Electronic control unit (TCU) with integrated electronics Hydraulic valve body with control solenoids and sensors Internal wiring and connectors for direct installation Direct replacement for original VW/Audi/Škoda/SEAT DQ250 units Important Note This is a used tested unit , not a new or refurbished part. It is designed as a direct replacement for original DQ250 mechatronics units in compatible applications. Software cloning or VIN adaptation may be required after installation. Vehicle Compatibility This mechatronics unit is suitable for selected vehicles equipped with 6-speed DSG DQ250 wet clutch transmission (up to 400 Nm). Public references list broad VW Group coverage across Volkswagen, Audi, Škoda and SEAT models. Suitable for Selected Vehicle Models Audi A3 / S3 (2003 - 2017) Audi Q3 / SQ3 (2011 - 2017) Audi TT / TTS (2006 - 2017) Audi A4 / S4 / RS4 (2008 - 2017) Audi A5 / S5 / RS5 (2008 - 2017) Audi A6 / S6 (2011 - 2016) Audi A7 / S7 (2011 - 2018) Audi Q5 / SQ5 (2009 - 2017) SEAT Alhambra (2010 - 2018) SEAT Altea (2004 - 2018) SEAT Leon (2005 - 2018) SEAT Toledo (2004 - 2009) Škoda Octavia (2004 - 2018) Škoda Superb (2008 - 2018) Škoda Yeti (2009 - 2018) Volkswagen Arteon (2017 - 2023) Volkswagen Beetle (2003 - 2018) Volkswagen Caddy (2004 - 2018) Volkswagen CC (2008 - 2016) Volkswagen Eos (2006 - 2012) Volkswagen Golf (2003 - 2018) Volkswagen Jetta (2005 - 2018) Volkswagen Passat (2005 - 2018) Volkswagen Scirocco (2008 - 2018) Volkswagen Sharan (2010 - 2018) Volkswagen Tiguan (2007 - 2018) Volkswagen Touran (2003 - 2018) Not Sure About Compatibility? If you are unsure whether this mechatronics unit matches your transmission version, send us your VIN number or the OEM number from your original unit. We will help verify compatibility before you order. Common Fault Codes & Symptoms Leading to Mechatronics Replacement DQ250 mechatronics faults can cause shifting problems, loss of drive, warning messages or transmission emergency operation. Typical symptoms and fault conditions include: P17BF Pressure control or internal mechatronics issue P1895 Pressure sensor / control-related malfunction P0841 Transmission fluid pressure sensor range / performance issue P1727 Clutch slipping or transmission operating fault P2711 Unexpected mechanical gear disengagement or shift monitoring problem P178B Vehicle remains stationary / transmission does not engage properly P174D Gear actuator or mechatronics control-related issue P0562 Supply voltage too low P0928 Gear actuator circuit range / performance fault P073A Gear engagement problem Vehicle will not move or only selects certain gears Engine may not start because transmission status is not recognized correctly Gearbox warning light or transmission fault message on dashboard Loss of odd or even gear operation Jerking, delayed engagement or limp mode operation Diagnostic Tip Fault codes alone do not always prove that the mechatronics unit is defective, because wiring, hydraulics, sensors or internal transmission faults can produce similar symptoms. Proper diagnosis before replacement is always recommended. Installation & Service Notes Recommended Steps Verify the exact DQ250 mechatronics version before starting work Inspect the original mechatronics assembly for related hydraulic or electrical damage Replace the complete mechatronics unit using correct assembly procedures Clone the original unit or load the correct software where required Perform adaptation and fault clearing after installation Test drive the vehicle and verify correct gearbox operation Important Installation Note This product is a used tested mechatronics unit. Installation requires professional equipment and knowledge of DSG systems. Incorrect installation or software mismatch can lead to transmission malfunction. Why Temic Mechatronics Matters 1. OEM Quality Temic is the original equipment supplier for DQ250 mechatronics systems. 2. Complete Unit This assembly includes TCU, hydraulic block, solenoids and sensors as a ready‑to‑install solution. 3. Reliable Shifting A tested mechatronics unit helps restore proper gear changes and transmission response. 4. Long-Term Durability Using a tested original unit supports long-term reliability of the DSG transmission. Quality Assurance & Warranty 12-Month Warranty: This used original mechatronics unit is supplied with a 12-month functionality warranty under normal operating conditions. Warranty Coverage Includes: Functional defects of the supplied mechatronics unit itself Material defects under normal use Basic operational functionality of the tested replacement part Warranty Exclusions: Incorrect installation or software mismatch Damage caused by incorrect rebuild procedures or contamination Electrical damage caused by wiring or voltage problems in the vehicle Physical damage or misuse Questions or Need Help? Our technical team is ready to assist with compatibility checks, installation guidance and product selection. Contact Important Purchase Information Please verify this mechatronics unit fits your specific transmission version before placing an order This product is a used tested mechatronics unit for DSG 6 DQ250 Professional installation and programming are strongly recommended Photos are for illustrative purposes only Worldwide shipping is available If your country is not listed at checkout, contact us and the order can be processed manually Please check carefully whether this product matches your gearbox version before ordering