Dumble 125V 15A RV Power Inlet Port Plug – NEMA 5-15P – 2-Pole 3-Wire (RVS-811990)

RV Electrical Power Inlet Dumble 125V 15A RV Power Inlet Port Plug – NEMA 5-15P – 2-Pole 3-Wire Dumble AC power inlet port plug with a 125-volt, 15-amp rating and NEMA 5-15P configuration. Designed for a 2-pole, 3-wire connection using cable up to 12 AWG/3C. This item includes installation instructions. SKU: RVS-811990 125V • 15A NEMA 5-15P Key Measurements & Specs Specification Detail SKU RVS-811990 Brand Dumble Product Type AC power inlet port plug Electrical Rating 125V, 15A NEMA Configuration 5-15P Wiring Configuration 2-pole, 3-wire Maximum Wire Gauge 12 AWG/3C Fitment / Application Category Details Application RV AC power inlet application Electrical System 125-volt, 15-amp AC Connector Standard NEMA 5-15P Installation Opening Requires a 2-inch hole saw during installation Fitment Check Confirm the electrical rating, NEMA configuration, wire size and mounting location before ordering. Top Features Feature Buyer Benefit 125V 15A Rating Provides the specified electrical configuration for compatible 125-volt AC applications. NEMA 5-15P Allows buyers to confirm the required plug configuration before installation. 2-Pole, 3-Wire Design Supports load, neutral and equipment-ground connections. Up to 12 AWG/3C Accepts cable up to the specified maximum wire gauge. Overview The Dumble RV power inlet port plug provides a 125V, 15A AC connection with a NEMA 5-15P configuration. This inlet uses a 2-pole, 3-wire arrangement and accepts cable up to 12 AWG/3C. The wiring layout identifies black as load, white as neutral and green as equipment ground. R&P Service Insight Confirm the electrical and mounting requirements before cutting the installation opening or connecting any wires. Electrical Match: Verify that the application requires a 125V, 15A NEMA 5-15P inlet. Cable Size: Do not exceed the specified maximum cable size of 12 AWG/3C. Mounting Preparation: Installation calls for a 2-inch hole saw and a 1/8-inch drill bit. R&P Knowledge Hub Compatibility: Intended for applications requiring a 125V, 15A AC power inlet with a NEMA 5-15P configuration. Wire Identification: Black connects to load at 125 volts, white connects to neutral and green connects to equipment ground. Cable Requirement: The maximum specified cable size is 12 AWG/3C. Installation Preparation: Mark the mounting location with a pencil before drilling the 2-inch primary opening and the mounting-screw pilot holes. Brand & Fitment Note Selling Brand: Dumble Product Configuration: 125V, 15A AC inlet with a NEMA 5-15P, 2-pole, 3-wire configuration. Application Reference: Listed for compatible RV power-inlet applications. Before Ordering: Verify the voltage, amperage, NEMA configuration, maximum wire gauge and available mounting space. R&P Repair Insight Correct wire identification and terminal placement are essential during assembly. Disconnect the power source before beginning installation and verify each conductor before securing the connections. Black Wire: Load connection for 125-volt power. White Wire: Neutral connection. Green Wire: Equipment-ground connection. Features 125V 15A AC Inlet Rated for compatible 125-volt, 15-amp AC electrical applications. NEMA 5-15P Configuration Clearly identified connector configuration helps buyers verify compatibility before ordering. 2-Pole, 3-Wire Connection Uses separate load, neutral and equipment-ground conductors. 12 AWG/3C Maximum Designed to accept cable up to the specified maximum wire gauge of 12 AWG/3C. Wiring Color Guide Wire Color Connection Black Load – 125 volt White Neutral Green Equipment ground Tools & Installation Supplies Required Tool or Supply Purpose Pencil Marking the installation and mounting locations Electric Drill Drilling the primary opening and mounting holes 2-Inch Hole Saw Cutting the primary inlet opening 1/8-Inch Drill Bit Drilling mounting-screw pilot holes Flat-Blade Screwdriver Assembly and terminal connections Cutting/Wire-Stripping Pliers Preparing the cable conductors #8 Pan-Head Stainless Steel Screws Four screws required for mounting Included Components Quantity SKU Included Component 1 RVS-811990 Dumble 125V 15A NEMA 5-15P RV power inlet port plug 4 — Mounting screws Important Installation Note: Verify the 125V, 15A electrical rating, NEMA 5-15P configuration, wire size, conductor placement and mounting location before installation. Installation should be completed with the power source disconnected. Mounting hardware and tools are not confirmed as included. Shop RV Electrical Parts Dumble RV power inlet port plug, RVS-811990, 125V 15A RV outlet, NEMA 5-15P inlet, 2-pole 3-wire AC power inlet, RV electrical inlet port, 12 AWG RV power inlet, 125 volt RV power connection