Carbon Fiber Interior Trims for Audi A7 S7 RS7 C7 (2010 to 2018)

Carbon Fiber Interior Trim for Audi A7 / S7 / RS7 C7 — 9-Piece Set The Audi A7 C7 introduced the Sportback concept to the executive segment — a fastback silhouette that gave buyers a reason to choose design over convention. This 9-piece genuine carbon fiber interior trim kit brings that same intention inside the cabin. Covering the dashboard, all four door panels, and the center console, the complete set replaces the factory trim with real carbon fiber — a material upgrade that complements the A7's exterior design language and reinforces what makes the Sportback body worth choosing in the first place. Built for a Car That Prioritizes Design The Audi A7 Sportback attracts buyers who made a specific choice: the coupé silhouette over the sedan practicality. Design matters here more than it does on the A6. Carbon fiber interior trim follows that logic — it's the interior upgrade that acknowledges what the car is for. The woven pattern introduces depth and contrast that the factory aluminium and piano black finishes cannot replicate, while creating a visual consistency between the A7's dramatic exterior lines and the cabin you spend every drive inside. On the RS7 Sportback C7 — with up to 605 horsepower in Performance specification, wrapped in one of the most aggressive production car bodies of its generation — the effect is the most natural. Carbon fiber trim is not an add-on here. It's the material the interior should have started with. Complete 9-Piece Carbon Fiber Interior Set Dashboard — 2 Pieces Two carbon fiber dashboard trim panels cover the primary visible surfaces flanking the C7's retractable MMI screen — the natural focal point of the driver's forward view. Door Panels — 4 Pieces Four matching carbon fiber door trim panels cover the interior inserts across all four doors. All four treated identically — the same real carbon fiber finish front and rear, consistent across the Sportback's longer door lines. Center Console — 3 Pieces Three carbon fiber center console trims address the most tactile area of the C7 cabin — the trim surrounding the MMI rotary controller, the gear selector, and the storage area between driver and passenger. Multiple Versions Available WET CARBON FIBER DRY CARBON FIBER Vehicle Compatibility This Audi C7 carbon fiber interior trim kit is designed for: ✓ Compatible Audi Models Model Generation Years Audi A7 Sportback C7 (4G) 2010 – 2018 Audi S7 Sportback C7 (4G) 2012 – 2018 Audi RS7 Sportback C7 (4G) 2013 – 2018 ⚠️ The kit is designed around the C7 interior architecture shared across these Sportback models. Audi offered several interior trim configurations during the C7's production run, including a mid-cycle facelift in 2014. Compare the supplied panels against your existing interior before ordering. Contact us before purchasing if you are unsure about fitment. Genuine Carbon Fiber Construction — Not a Wrap or Overlay These are not carbon-effect stickers, printed plastic panels, or vinyl wraps. Each piece uses real carbon fiber with a 2x2 twill weave, giving every panel the characteristic depth and reflective quality of genuine composite material. A high-gloss clear coat provides the protective finish — enhancing the weave pattern while guarding against UV exposure, light abrasion, and everyday interior contact. The carbon weave direction is aligned across the full set for a consistent, cohesive appearance once all nine pieces are installed. OEM-Level Fit and Integration Each Audi A7 C7 carbon trim panel is shaped around the C7's original trim geometry. Installed, the pieces sit flush against adjacent surfaces — controls, the retractable MMI screen, and surrounding panels remain in factory position and function exactly as before. This makes the upgrade well-suited to an OEM+ build: a more premium-looking interior that reads as intentional rather than modified — which matters more on a car bought for its design than almost any other. Direct-Fit Installation — No Permanent Modification No cutting, no drilling, no permanent alteration to the vehicle. Remove the factory trim using a plastic trim removal tool. Clean the mounting area and check that original clips are clear. Position the carbon fiber panel against the factory mounting locations. Press firmly and evenly into place. Confirm flush fit before moving to the next panel. Allow approximately 30–60 minutes for the complete set. Original trim panels can be retained and reinstalled — the modification is fully reversible. Carbon Fiber Trim for the RS7 Sportback — The Interior the Exterior Deserves The RS7 C7 Sportback is one of the defining performance cars of its generation — a twin-turbo V8 grand tourer that blurred the line between executive transport and supercar. Real carbon fiber interior trim resolves the interior side of that equation — bringing the cabin's visual quality in line with the RS7's price, power, and exterior presence. On the A7 and S7 C7, the same set delivers a more design-coherent cabin without requiring bespoke factory options. Pair with exterior carbon fiber accessories or RS-spec mirror caps for a unified carbon fiber interior and exterior aesthetic. Product Specifications Compatible Models Audi A7 / S7 / RS7 C7 Model Years 2010 – 2018 Material Genuine carbon fiber Weave 2x2 twill Finish High-gloss clear coat Number of Pieces 9 Coverage Dashboard (x2), 4 door panels, center console (x3) Installation Direct-fit / factory mounting points Modification Required None Reversible Yes Warranty 1 Year Frequently Asked Questions Is this genuine carbon fiber? Yes. Real carbon fiber with a 2x2 twill weave and high-gloss clear coat. Not vinyl, not printed plastic, not a carbon-effect overlay. Does the kit fit the A7, S7, and RS7 C7? The kit is designed around the C7 interior platform shared across these Sportback models. Because Audi offered multiple interior configurations, verify fitment against the product images before ordering. Does the RS7 use the same interior as the A7? The C7 A7, S7, and RS7 share the same interior dashboard and door architecture. The carbon fiber trim kit is compatible across all three variants. Contact us for specific configuration queries. What changed with the 2014 facelift? Audi updated the C7 A7's exterior and some interior details in 2014. The trim panel mounting geometry remained the same across pre-facelift and facelift models. Compare product images to your existing panels before ordering. Can I install this myself? Yes. The direct-fit installation suits a DIY enthusiast with basic trim removal experience. Plastic trim tools are recommended. Is the modification reversible? Yes. Retain your original trim panels. Fully reversible — reinstall at any time. Will the weave pattern match across all nine pieces? The full set uses the same 2x2 twill carbon fiber weave with aligned grain direction. Minor natural variations in reflection are characteristic of genuine carbon fiber and are not a defect. How do I clean the carbon fiber trim panels? Soft microfiber cloth and a mild automotive interior cleaner. Avoid abrasive products that could damage the high-gloss clear coat. Upgrade Your Audi A7 C7 Interior Nine panels. Dashboard, four door panels, and center console. Real carbon fiber, 2x2 twill weave, high-gloss clear coat, vehicle-specific fit, reversible installation. The most impactful Audi A7 C7 interior upgrade available without modifying a single factory component. Every order includes Free Shipping and a 1-Year Warranty.