SE Electronics V7 VE Vintage Edition

sE Electronics V7 VE Vintage Edition is a dynamic vocal microphone with the supercardioid DMC7 capsule, in a limited finish combining a hammered green body with a polished chrome grille. The capsule and electronics are identical to the standard V7. Headroom before feedback on a small stage A supercardioid pattern has a narrower acceptance angle at the front and pronounced nulls at the rear — exactly where a wedge sits on a club stage. In practice that is several decibels more gain before the channel starts ringing, plus less snare and guitar bleeding into the vocal. The aluminium voice coil in the DMC7 capsule is lighter than a conventional copper coil, so the microphone tracks transients faster and the vocal does not turn dull. Construction that comes back from tour in one piece The body is all metal, in zinc alloy, and the spring steel grille does not dent after a drop and does not corrode. The bevelled edge around the grille stops the microphone rolling when it is put down on an amp or the stage floor. A patented integrated shock mount decouples the capsule from the body, so handling noise is markedly lower than in comparable microphones — and with a singer holding the mic for an entire set, handling noise is the usual source of trouble in that channel. KEY FEATURES Supercardioid DMC7 dynamic capsule Aluminium voice coil and neodymium magnet Limited finish: hammered green body, polished chrome grille Patented integrated shock mount Spring steel grille, dent-proof and corrosion-free Switchable internal windscreen Bevelled grille edge that stops the mic rolling All-metal zinc alloy chassis TECHNICAL SPECIFICATIONS Transducer type: dynamic Polar pattern: supercardioid Frequency range: 40 Hz – 19 kHz Sensitivity: 2.0 mV/Pa (-54 dB) Impedance: 300 Ohms Magnet: neodymium; voice coil: aluminium Connector: 3-pin male XLR Dimensions: 54 mm diameter, 184 mm length Weight: 305 g In the box: microphone, mic clip, thread adapter, black internal windscreen, carrying pouch