Creator's Resin Bundle

What's included 【Shipping to US/EU】 Standard Resin V2*1KG (Random Colour) Standard Resin*1KG (Random Colour) Water Wash Resin 2.0*1KG (Random Colour) ABS-Like Resin 2.0*1KG (Random Colour) 【Shipping to UK】 Standard Resin*2KG (Random Colour) Water Wash Resin 2.0*1KG (Random Colour) ABS-Like Resin 2.0*1KG (Random Colour) Note Due to limited stock, substitutions with random alternatives may occur if any colours are sold out. Product images are for reference only; actual colors may vary. Estimated Shipping Time 🚚 Ships in 24 hours Introduction Compare Standard vs V2 toughness. Plus water-washable convenience and ABS-like strength. 4kg total. Perfect for makers, engineers & home use. Shop now. Standard Resin The classic all‑purpose resin delivers balanced, reliable performance with a beginner-friendly printing experience. Perfect for miniatures, figurines, concept models, and any print where precision matters most. ABS-Like Resin 2.0 Anycubic ABS-Like Resin 2.0 delivers an 83–85 HD hardness for extreme durability and a 1800 MPa bend modulus to resist brittle breaks. drill, tap, and machine your prints effortlessly—this is true toughness. Water Wash Resin 2.0 Engineered with a hydrophilic formulation, this solution redefines post-processing. Efficiently remove residual resin with water only—no isopropyl alcohol (IPA) required. Standard Resin V2 Reformulated from classic, delivering unprecedented toughness. Resulting models resist drops/impacts, flex without fracture, and balance strength with ductility. Instructions for Use 1. Before use Shake the liquid resin well Clean the resin tank and build plate Ensure the tank bottom remains highly transparent Confirm the release film is undamaged Verify correct print parameter settings Recommended printing environment: 20-35 °C (to prevent temperature-related failures) 2. During Use Unscrew the bottle cap and remove the sealing film Pour resin into the tank without exceeding the max fill line 3. After Printing Use the included tools for post-processing: Scraper /Flush cutters /Tweezers / Gloves ≥95% IPA cleaning solution 4. Post-Processing Remove models from the build plate using a scraper, and remove supports Clean models in the Anycubic Wash & Cure machine for ~10 minutes (use ≥95% alcohol or cleaner) Dry models: Air-dry, blow-dry, or use drying chamber (prevents water absorption/cracking) Secondary curing: Cure models for 3-5 minutes Resin recycling: Filter through a 100-mesh sieve Precautions Store at room temperature away from light Recommended use temperature: >20°C (low temperatures reduce success rate; high temperatures accelerate pigment settling) If pigment settles: Stir with a plastic scraper or shake the resin bottle Resin cures under sunlight: Print in dim, ventilated areas or cover the printer Remove models promptly after washing to avoid property degradation Always wear nitrile gloves and goggles (avoid skin/eye contact) Waste disposal: Cure resin completely before discarding as solid waste Maintain ventilation; keep liquid away from pregnant women, children, and pets Ps: Material properties will vary depending on the molding equipment, post-curing method, and testing equipment. For safety information, please refer to the MSDS of this product. If you encounter any problems while using it, please feel free to contact us.