AeroTech K535W-14A 54mm x 358mm Single Use DMS 1-Motor Kit - 115314

The AeroTech Disposable Motor System DMS is a single-use motor in kit form that is assembled by the user. All of the Aerotech DMS motors use all-disposable components. The nozzle and propellant are already installed. You will need to set the desired delay time using the Universal Delay Drilling Tool (UDDT), Not Included, and then pour in the ejection charge. The Universal Delay Drilling Tool (UDDT) is required to adjust to a shorter time delay on all DMS rocket motors and is available in the AeroTech Accessories section of this website.DMS motors feature a filament-wound fiberglass casing, a glass-reinforced composite phenolic nozzle, a molded plastic bulkhead and RCSs exclusive White Lightning aerospace grade composite propellant formulation, which produces a brilliant white flame with lots of dense white smoke and a throaty roar at lift-off.This AeroTech motor pack comes with 1 rocket motor and 1 FirstFire Initiator.Requires HAZMAT shipping The sale of this high power motor to persons under 18 years of age is currently prohibited by federal law. This is a High-Power motor requiring Level 3 High-Power certification through CAR to purchase.Certified by the Tripoli Rocketry Association (TRA), the National Association of Rocketry (NAR) and the Canadian Association of Rocketry (CAR). Specifications Motor Diameter 2.125 inches (54mm) Casing Length 14.10 inches (358mm) Total Impulse 1434 N-sec Average Thrust 535 newtons Peak Thrust 655 N-sec Thrust Duration 2.8 seconds Delay Time adjustable up to 14 seconds Propellant Weight 745 grams Motor Weight 1264 grams Maximum Liftoff Weight Due to the variables involved, AeroTechQuest currently does not list or post recommended maximum lift-off weights for their mid-power and high-power rocket motors. Instead, we recommend utilizing either the RockSim software available at www.apogeerockets.com or OpenRocket Simulator available at www.openrocket.info.