Button Badge Rings – Die Height Washer Spacer | 58mm & 44mm

Button Badge Rings — Height Washer for Badge Dies Use these button badge rings as a die height washer when your badge press, mould, and raw material stack do not line up perfectly. The black spacer ring sits in the outer recess of the die to raise the pressing height so shells, mylar, and paper can crimp more reliably across different machine and material combinations. Important: This is a compatibility aid, not a universal fix. Results vary by press model, mould depth, and consumable thickness. Many shops see fewer half-presses and mis-crimps; some machine and material pairs still will not work — test on your setup before bulk production. Key Features Die Height Spacer: Washer-style ring increases effective die depth for thicker or mismatched badge stacks. 58 mm & 44 mm Sizes: Match the two most common round button badge diameters used in Indian print shops. Value Combo Set: Order the 58 mm + 44 mm pair together when you run both sizes on one bench. Rigid Black Finish: Flat profile with clean edges for repeatable placement in the die groove. Raw Material Friendly: Helps when switching between pin-back, magnet, or slightly different shell gauges on the same press. Made for Badge Makers: Ideal add-on for button badge machine owners, sublimation badge units, and ID print studios. How to Use Press a test badge without the ring and note if the curl is shallow, paper tears, or the back does not lock. Place the correct size ring in the outer die recess (see comparison photo in gallery). Load shell, artwork, mylar, and back as usual; press again and inspect the curl and back lock. Keep the ring installed only when it improves your stack — remove it if the press becomes too tight. Best For Shops mixing 58 mm and 44 mm badge lines on shared equipment Operators troubleshooting height mismatch between dies and consumables Spare-part stock for field service and training demos Pair with 58 mm and 44 mm button badge raw material, machines, and cutters from AbhishekID for a complete badge workflow.