XTAR PB2SL V2 Battery Charger & Power Bank – Black

Use your removable lithium-ion cells for portable USB power, then recharge them in the same device. The black PB2SL V2 combines a two-slot charger with USB-C and USB-A outputs.Features and compatibility Accepts 3.6V/3.7V 18650, 18700, 20700 and 21700 lithium-ion cells, including compatible protected formats. USB-C input: 5V/3A or 9V/2A. Charging output up to 2A per slot with suitable input power and cells. Up to 18W PD/QC output; up to 22.5W with compatible SCP devices. Output depends on the connected device, cable and installed batteries. Display shows battery information, voltage and current. Low-current mode supports compatible small USB devices. What's includedBlack XTAR PB2SL V2 charger/power bank and one USB-A to USB-C cable in original XTAR retail packaging.Batteries and USB wall adapter are sold separately. A suitable USB-C cable may be needed for your device. For fast output, XTAR recommends two matching cells rated for at least 7A continuous discharge; the device's capacity depends on the cells installed.Battery safetyUse only the supported rechargeable chemistry and observe polarity. Check each cell's manufacturer charging limit before selecting a current; the charger's maximum is not a recommended rate for every cell. Do not charge damaged, leaking, swollen or overheated cells, or cells with damaged wrappers. Do not use disposable batteries, 1.5V lithium-ion cells or LiFePO4 cells. Charge on a nonflammable surface in a dry, ventilated area, away from children and combustible materials. Do not leave charging unattended. Stop use if a cell or charger becomes unusually hot.Manufacturer warranty: 24 months for qualifying defects, subject to XTAR's terms. For support, contact support@diy500amp.com.XTAR product information and user manual