Harvia KIP Electric Sauna Heater with Wifi (4.5 kW - 8 kW)

Harvia KIP WiFi Traditional Sauna Heater Upgrade your traditional sauna with premium Harvia heating and convenient WiFi control from your phone. The Harvia KIP WiFi combines Harvia's proven wall-mounted electric sauna heater with the Harvia Xenio WiFi control system, allowing you to control and monitor your sauna from the touchscreen control panel or remotely through the MyHarvia mobile app. Available in 4.5 kW, 6 kW, and 8 kW configurations, the heater can be properly matched to your sauna size while giving you a more modern and convenient sauna experience. Heater Sizing & Electrical Requirements Heater Size Recommended Cabin Size Power Electrical 4.5 kW 100–211 cu. ft. 4,500W 240V, Single Phase 6 kW 170–300 cu. ft. 6,000W 240V, Single Phase 8 kW 251–424 cu. ft. 8,000W 240V, Single Phase WiFi & Smart Controls Control Your Sauna From Your Phone Connect your sauna to the MyHarvia mobile app to remotely control and monitor your sauna from virtually anywhere. Depending on your installation, the system allows you to: Start and stop the sauna heater Adjust sauna temperature Monitor sauna status and temperature Set timers and schedules Control compatible sauna lighting Control compatible ventilation See when your sauna is ready Xenio Touchscreen Control A separate Harvia Xenio touchscreen control panel provides precise control of your sauna without requiring you to operate controls directly on the heater. The compact digital panel can be conveniently installed outside or in an approved location near the sauna. Safe Remote Operation The WiFi system includes a sauna door sensor designed to support safe remote operation. The system verifies the sauna's status before allowing remote heating, helping prevent the sauna from being started remotely when the door has been opened after remote operation has been enabled. Traditional Sauna Experience The KIP provides the classic high-heat sauna experience using heated sauna stones. The large stone compartment retains and gradually releases heat throughout the sauna. Small amounts of water can be poured over the heated stones to produce bursts of humidity and create a traditional Finnish-style sauna experience. Premium Harvia Construction The Harvia KIP features durable steel construction, stainless steel heating elements, a protective stone guard, and a dual-wall design engineered for dependable sauna use. Space-Saving Wall-Mounted Design The heater mounts directly to the sauna wall, preserving valuable floor space while providing efficient heat distribution throughout the cabin. UL Listed Heater The Harvia KIP models offered for the U.S. market are UL Listed, providing recognized third-party safety certification for the heater. What's Included Harvia KIP electric sauna heater Harvia Xenio WiFi control system Xenio touchscreen control panel Temperature sensor Door sensor for remote operation Required control-system components Sauna stones Wall-mounting hardware Choosing the Correct Heater Size The proper heater size depends on the interior cubic footage of your sauna, insulation, glass area, ceiling height, and overall construction. A larger heater is not necessarily better. Proper sizing allows the sauna to heat efficiently and operate as intended. For GeyserSteam sauna packages, we can recommend the appropriate 4.5 kW, 6 kW, or 8 kW configuration based on your sauna model. Electrical Installation The Harvia KIP WiFi requires a dedicated 240V electrical circuit and hardwired installation. Electrical installation must be performed by a certified or licensed electrician. The electrician is responsible for confirming the appropriate breaker size, conductor size, grounding, disconnects, control wiring, sensor installation, and all other electrical requirements based on the specific heater, Harvia installation instructions, and applicable electrical codes. WiFi connectivity is required to use remote app features. Final electrical and installation requirements must be verified before installation.