Lord RVN Chassis DIY Kit

Here at The Saber Armory, we are pleased to continue our ECO Chassis offerings! The listing is available as 2 options. Either just the chassis itself, or a full installation kit comprising of chassis and all electronic components required for installation. Please note, tools and consumables such as wire, heat shrink, solder etc. are not included. We do offer 'PTFE Wire Install Kits' separately here. Please note, the electronics are not installed for you. If you purchase a DIY Install Kit you will be required to solder and install the electronics yourself. These products are targeted towards the DIY lightsaber community. This particular Chassis DIY Kit is for the Lord RVN DIY Empty Hilt Kit. ECO Chassis Design Specs and kit contents below: Part Description Part Spec QTY Battery (Contacts Included) Keeppower 18650 3000mAh Removable 1 Soundboard Proffiev3.9/CFX/GHV4.0 1 NeoPixel Hilt Side PCB ECO NPXL V4 1 Switches Brass Tactile 1.5mm 2 Power Management High Amp Kill Switch 1 Speaker 28mm Bass Speaker 1 ECO-CC kits will also include: Part Description Part Spec QTY Crystal Chamber LED Adafruit NeoPixel RGB 5050 LED 1 ECO-Max kits will also include: Part Description Part Spec QTY Crystal Chamber LED Adafruit NeoPixel RGB 5050 LED 1 Chamber Motor Micro Motor 47RPM 1 Bluetooth Module ShtokCustomWorx FSC-BT909 Module 1 OLED Screen KR 128X32 OLED Display Module 1 ELITE Chassis Design Specs and kit contents below: Part Description Part Spec QTY Battery (Contacts Included) Keeppower 18650 3120mAh Removable 1 Soundboard Proffiev3.9 1 Speaker 28mm Bass Speaker 1 Switches Brass Tactile 3.0mm 2 Power Management High Amp Kill Switch 1 NeoPixel Hilt Side PCB SCW NPXL Short Pins 1 Chamber Motor Micro Motor 47RPM 1 Accent LED Strip 3.5mm 2020 Strip - 20 LED Segment 3 Accent LED Ring SCW Pixel Ring - Large 1 Crystal LED Adafruit NeoPixel RGB 5050 LED 1 OLED Screen KR 128X32 OLED Display Module 1 Brass Rod (Cut to 63-65mm) 2.0mm Brass Rod 1 Magnets 2x2mm NeoDymium Disc Magnets 32 Kyber ELITE Chassis Design Specs and kit contents below: Part Description Part Spec QTY Battery (Contacts Included) Keeppower 18650 3120mAh Removable 1 Soundboard Proffiev3.9 1 Speaker 28mm Bass Speaker 1 Switches Brass Tactile 3.0mm 2 Power Management High Amp Kill Switch 1 NeoPixel Hilt Side PCB SCW NPXL Short Pins 1 Chamber Motor Micro Motor 47RPM 1 Accent LED Strip 3.5mm 2020 Strip - 20 LED Segment 3 Accent LED Ring SCW Pixel Ring - Large 2 Crystal LED Nano NeoPixel RGB Accent LED (5mm) 4 OLED Screen KR 128X32 OLED Display Module 1 Crystal Connectors Mill-Max 3-Pin Contact Header Set 2 Removable Crystal Resistor 10kOhms 0603 SMD Resistor 2 Removable Crystal Resistor 20kOhms 0603 SMD Resistor 2 Brass Rod (Cut to 63-65mm) 2.0mm Brass Rod 1 Magnets 2x2mm NeoDymium Disc Magnets 44 Please see general chassis processing times below: Chassis Type Business Days ECO Chassis 3-5 ECO-CC Chassis 3-5 ECO-Max Chassis 5-7 ELITE Chassis 21-28 Kyber ELITE Chassis 30-40 Please also familiarise yourself with our shipping policy before ordering: https://thesaberarmory.com/shipping-policies/ Important note: Once your order has been placed, it will not be possible to cancel. Once you have made the payment, you are committed to your purchase. These are MADE TO ORDER! There are no exceptions for this, so if you are reading this and intend to email asking to cancel – please do not. Your request will not be accepted. Only purchase if you can afford to do so.