Pulsar PSR3584 Gen 3 Turbo

Dual Ceramic Ball Bearing System 10 Blade Gen2 Billet Compressor Wheel with Extended Tapered Tip Technology Inconel 713c 10 Blade Turbine Wheel with High Horsepower Cover Integrated with the Speed Sensor Port 0.83, 1.01 A/R dual v-band turbine housing, T3 0.63, 0.82 V-Band outlet, T4 0.82 V-Band outlet etc. turbine housings in option V-Band Flange kit(s) for the exhaust housing included Max Air Flow rate: ~90 lb/min, rated @ 1000 FWHP Stronger Turbine Wheel for High flow Compressor Wheel: 67*84mm Turbine Wheel: 74*66mm Compressor Inlet: 4.0” Hose Compressor Outlet: 2.5” Hose Turbine Inlet: T3, T4, or 2.5″ V-Band Turbine Outlet: 3″ V-Band (3.55″OD) Oil Feed: -4 AN connect to the Oil Restrictor Oil Drain: Std T3 Flange Water In/Outlet: M14*1.5 We highly recommended running water cooling for better durability Comes with Inlet flange and clamp (DVB) and Outlet flange and clamp Based off our popular GTX3584RS series turbo, This is very similar but with the larger 66mm rear wheel. PSR3584 GEN3 TURBO comes with stronger turbine wheel for high flow. Housing Options: .63 T3 V Band .82 T3 V Band 1.06 T3 V Band .82 T4 V Band .83 Dual V Band 1.01 Dual V Band 1.06 T3 XR6 5 Bolt Rear/ Internal Gate .85 T4 Divided 1.06 T4 Divided V Band .86 T3 Divided V Band Housing Style: Standard Housing Stainless Steel Wrapped Housing — available at additional cost (Please allow 1-2 weeks for stainless steel wrapped housings if stock isn’t available.) The Stainless Steel Wrapped Housing option adds an external stainless steel heat-retaining wrap around the turbine housing to help contain radiant heat around the turbine area.Where listed, the turbocharger can also be selected without a turbine housing.