AVM - CD 5.2 MK 2 - CD Player w/ DAC

Sonically the CD5.2 convinces the listener with the charming and warm sound the tube output stages produce. These balanced output stages derived from the PA8 thrill the listener with the emotion loaded music reproduction. Also in the digital domain no expenses were spared and two DACs per channel even work in the digital domain in balanced mode. Similar to the CD3.2 the CD5.2 is reduced to the max. Still it offers a large variety of connectivity. All functions are intuitively operable. The perfectly machined housing is built without visible screws and comes standard in silver or black. The traditional AVM chrome front is available as an option. Other customizations are available upon request. The RC 3 is always included. Tube output stages equipped with ECC83 (12 ax7a), balanced mode • Regulated high voltage generator independent from AC mains for supply of the tubes • 2 line outputs (Cinch und XLR) • 7 digital inputs: 2 x USB (1 x 192/24 asynchronous, 1 x 48/24), 2 x SPDIF coaxial, 2 x SPDIF opt., AES/EBU) • 2 digital outputs (SPDIF coaxial & SPDIF opt.) • PureCD CD mechanism with slot-in, spring mounted • Signal processing with up to 192 kHz/24 bit (upsampling rate adjustable from 44,1 kHz/16 bit to 192 kHz/24 bit) • 2 switchable digital filters (smooth/sharp) • separated power supplies for CD drive and audio electronic • Blue graphic display, dimmable • RC3 included • Available finishes: Aluminum silver or black, chrome front optional The CD5.2 offers connectivity in plenty: 2 x USB (1 x 192/24 asynchronous, 1 x 48/24), 2 x SPDIF coaxial, 2 x SPDIF opt. and one AES EBU digital input. The XLR- and cinch outputs use different drivers and may be operated simultaneous. Cutting edge technology is applied for the signal processing thruout. Each channel sparks two DACs operated in balanced mono mode. This way the SNR is optimized to the theoretical maximum. The upsampling allows switching the output samplerate between 44.1 and 192 kHz and simultaneous allows the choice between two digital filter characteristics (sharp or smooth). With the upsampling circuit the master tact is regenerated completely and jitter is kept away from the DACs. The PureCD mechanism is spring mounted and completely capsuled. Like all AVM hi-fi components the CD5.2 is carefully developed and assembled by our engineers in Malsch, Germany. Our vendors for housing and electronic parts reside all near-by. This proximity helps us to easily ensure and maintain superb quality level of the supplied parts for the AVM hi-fi components made of these. During the manufacturing process we perform repeatedly numerous tests to insure the absolute quality of our products. When the assembling is finished and the first inspection is done all units must pass a run in test in order to prove their reliability. After that a careful final inspection follows before packing & shipping. All this ensures creating a perfect product from AVM for our customers. Technical Data EVOLUTION CD5.2 CD, digital in/out Formats CD-Audio (red book), CD-R Upsampling 192 kHz/24 bit switchable Deemphasis yes, automatic Digital-inputs 33–192 kHz/16–24 bit (S/PDIF, AES/EBU, TOSLINK up to 96 kHz) USB-Input up to 48 kHz/16 Bit Digital-output 44,1 kHz/16 bit (with CD) (S/PDIF, TOSLINK) or input format Digital inputs: Input impedance Cinch 75 Ohm Input impedance XLR (AES EBU) 110 Ohm Input voltage acc. IEC 958 Digital outputs: Output impedance Cinch 75 Ohm Output impedance XLR 110 Ohm Output voltage acc. IEC 958 Analog outputs: Output voltage 2,5V Output impedance Cinch 50 Ohm Output impedance XLR 150 Ohm Frequency range <5 Hz – 20 kHz, via digital inputs >50 kHz SNR 102 dB/105 dB(A) TIM 0,01 % (mostly K3) Miscellaneous Power supply 230 V/50 Hz Maximum power supply 40 W Standby <1 W W x H x D 430 x 130 x 325 mm Weight approx. 11 kg