International PA-10

PA10 Vinyl Etch Primer Type: Single-pack vinyl etch primer Chemistry: Vinyl-based etch primer Use: Aluminium, steel and other non-ferrous metals Marine use: Above the waterline Finish: Low sheen / matt Colours: Red oxide, grey and black Performance Characteristics Provides excellent anti-corrosive protection Etches the metal while simultaneously providing the first primer coat Promotes adhesion of subsequent coating systems Particularly useful on aluminium and steel Quick drying compared with conventional build primers Suitable for marine and freshwater environments above the waterline. Suitable for: Aluminium Steel Zinc-galvanised steel Other non-ferrous metals Concrete floors in certain applications It is not intended for aluminium propellers. Drying / Recoat Touch dry: approximately 15–45 minutes at 23°C, depending on the particular application conditions/source Recoat: approximately 10 hours according to the NZ retail technical information Lower temperatures and high humidity will extend drying times. Important: Don't treat the very fast touch-dry time as meaning you can immediately put any coating over it. Follow the PA10 TDS and the TDS of the coating going over it. INTERNATIONAL PA10 Tech Data Sheet Note: Southern Paints accepts no liability for any claims, damages, or warranties arising from the use of this product, as its application is carried out beyond our control. It is the responsibility of the user to ensure proper surface preparation, mixing, and application in accordance with industry standards and guidelines. This product contains chemicals that may be hazardous to health; appropriate personal protective equipment (PPE) must always be used, and application should take place in a well-ventilated area or spray booth. Always follow safety data sheet (SDS) recommendations and local regulations.