14.8V 4S 6000mAh 50C High Capacity LiPo Battery Pack (XT60) - Professional Grade

Engineered for high-endurance and heavy-duty performance, our 6000mAh 14.8V 4S Series is the premier choice for 1/8 scale RC surface vehicles and large-scale aviation. These packs deliver a consistent 14.8V platform, providing the high torque needed for aggressive bashing and the sustained capacity required for long-range UAV missions. 4S Application & Performance Guide: • Endurance & Cruising (35C): Optimized for large scale fixed-wing planes and professional aerial photography drones. • Sport Bashing & Flight (50C - 60C): The "Sweet Spot" for standard 1/8 scale buggies, truggies, and 1.5m+ sport aircraft. • Extreme Torque & Speed (75C - 100C): Built for 4S Monster Trucks (Arrma/Traxxas), high-speed speed runs, and 80mm+ EDF jets. Optimized 4S Power Density: At just 540g, it offers one of the best capacity-to-weight ratios for extended runtimes. Chassis-Ready Dimensions: The 148 * 46 * 40 mm standard block fits perfectly into most 1/8 scale battery trays and airplane fuselages. High-Current Thermal Stability: Low-IR cell matching ensures the pack stays cooler during high-throttle "punch-outs" and heavy bashing. Professional Customization: We provide OEM support for custom wire gauges (10AWG/12AWG) and bespoke connector configurations. Connector Selection Guide: XT60 Standard for light aircraft and low-current 4S setups. XT90 / XT90-S The professional choice for high-C packs; XT90-S (Anti-Spark) is highly recommended to protect your ESC from surges. EC5 The rugged industry standard for high-vibration 4S RC cars and heavy-duty bashers. Technical Specifications Capacity 6000mAh Voltage 14.8V (4S1P) Discharge Rates 35C / 50C / 60C / 75C / 100C Weight 540g (±15g) Dimensions 148 * 46 * 40 mm Balance Plug JST-XH (Standard) Connectors XT60 / XT90 / XT90-S / EC5 Cell Chemistry Lithium Polymer (LiPo) Safety & Storage Best Practices Always charge using a dedicated 4S LiPo balance charger at a maximum of 1C (6.0A). Storage Protocol: Maintain cells at 3.80V-3.85V per cell if stored for more than 48 hours. Do not discharge below 3.5V per cell (14.0V total) to prevent permanent cell damage. Never leave batteries unattended during charging; always use a LiPo-safe fireproof bag.