Exterior Wood Stain - Sansin SDF-2 - Saturated and Ultra-Saturated Colors 946ml
Exterior Wood Stain - Sansin SDF-2 - Saturated and Ultra-Saturated Colors 946ml Ideal for Exterior Siding, Decks, Cladding and Fences Exceptional protection against UV rays and harsh weather Low VOC One-coat formula Will not peel, crack or blister Coverage of approximately 200 to 300 square feet per gallon Available in a wide variety of colours Visit us in store to discover our wood display showcasing the different colours offered by SANSIN. Available in a wide range of natural, semi-transparent and even opaque colours, SANSIN SDF provides strong and effective protection for all exterior wood surfaces. Its specially formulated oils and resins penetrate deeply into the wood to protect it against harsh climates and ultraviolet rays. Its water-based technology provides complete protection in a single coat, although a second coat can create an even richer and more beautiful finish. Its highly water-repellent properties make it the obvious choice for homes and structures exposed to moisture. Not only does SDF protect the exterior surface of the wood, but it also preserves the core by allowing the wood to “breathe,” preventing moisture from becoming trapped and causing rot. SANSIN SDF is ranked by siding manufacturers among the best natural wood coatings available on the market. DESCRIPTION SANSIN SDF is an environmentally friendly single-coat finish specially designed for wood siding, decks and fences. This product is UV resistant, water repellent, low VOC, non-flammable and easily cleaned with water and mild soap. With only one application, this unique, rich and attractive formula provides long-lasting protection. SANSIN SDF will not crack, peel or blister. A maintenance coat should be applied every two to three years on horizontal surfaces and every two to four years on vertical surfaces. APPLICATIONS Exterior siding Decks Fences Outdoor furniture Log homes PRODUCT BENEFITS Environmentally friendly Penetrating formula Single-coat application Can be applied on damp wood Provides dimensional stability Non-flammable Non-film forming UV resistant Water repellent COLOURS Available in the full range of Sansin colours as well as custom architectural colours. Colours may vary depending on wood grain, texture, porosity and wood species. Results may differ from those illustrated. Always test beforehand to ensure the desired result. Colors Grain Appearance Finish Natural Transparent Low-lustre matte Translucent Semi-transparent Low-lustre matte Saturated Opaque Low-lustre matte SURFACE PREPARATION Ensure the surface is free of defects or deterioration. Replace defective boards or components if necessary. Sand the wood using a belt sander or orbital sander with 60 or 80 grit sandpaper. APPLICATION METHOD Apply SANSIN SDF using the desired method: dipping, brush application or spray application (pressure pot or airless sprayer). PROCEDURES Test on an inconspicuous area to verify colour and product penetration. Apply under suitable conditions, ideally at 70ºF (21ºC) with approximately 50% relative humidity. For best results, apply a generous coat of SANSIN SDF for maximum absorption and wipe away excess product a few minutes later using a brush. Continuously monitor the surface and wipe away any puddles or runs. For superior protection, a second coat of SANSIN SDF may be applied. Do not apply during the hottest part of the day or in direct sunlight. This may cause a surface film to form and limit penetration, which could lead to peeling in the near future. Do not apply during rainy conditions or cold nights. The product requires 24 hours of drying time after application. When using tinted product, mix thoroughly before and during application. Always read the application instructions before starting your project. MAINTENANCE Vertical surfaces require maintenance every 3 to 6 years. Maintenance is necessary when the surface shows signs of wear such as fading or erosion. Regular maintenance will help preserve the wood colour over time, improve dimensional stability and maintain water repellency. Periodically clean the wood using a pressure washer and/or Sansin Multi-Wash to remove dirt and debris. Maintenance frequency depends on the quality of surface preparation, application method and application conditions. If fading or erosion becomes noticeable, clean the wood using a pressure washer and/or Sansin Multi-Wash to remove dirt and debris. Then reapply a maintenance coat of Sansin SDF following the application instructions.
Specifications
- COLORS
- 43 Limestone Trail, 50 Cap Cod Gray, 51 Silver Gray, 52 Opaque White, 53 Silver Birch, 54 Barn Opaque, 55 Tan Opaque, 56 Oxford Opaque, 57 Mahogany, 58 Mocha, 59 Burgundy, 60 Garnet, 61 Heritage Blue, 62 Baltic Blue, 63 Kelp, 64 Sage Green, 65 Mushroom Opaque, 66 Moss Green, 67 Chesapeake, 68 Hunter Green, 69 Forest Green, 70 Walnut, 71 State Blue, 73 Red Oak, 74 Ocean Bay Blue, 75 Atlantic Blue, 76 Blue Jay, 77 Indigo Blue, 78 Colonial Yellow, 86 Deep Orange, 87 Primary Red, 88 Muskoka Red, 89 Yellow Ochre, 90 Primary Yellow, 92 Heritage Red, 93 Federal Blue, 94 Hisbiscus, 95 Harbor Fog, 99 Starry Night, 101 Galaxy Blue, 103 Little Boy Blue, 105 Burnt Ochre, 113 Grinch Green, 114 Purple Rain, 115 Orange Tabby, 116 Pea Soup, 117 Mulligan Green, 118 Cinnabar, 119 Lipstick Pink, 120 Forever
Variants (50)
- 43 Limestone Trail — 56.00 CAD — Out of stock
- 50 Cap Cod Gray — 56.00 CAD — Out of stock
- 51 Silver Gray — 56.00 CAD — Out of stock
- 52 Opaque White — 56.00 CAD — Out of stock
- 53 Silver Birch — 56.00 CAD — Out of stock
- 54 Barn Opaque — 56.00 CAD — Out of stock
- 55 Tan Opaque — 56.00 CAD — Out of stock
- 56 Oxford Opaque — 56.00 CAD — Out of stock
- 57 Mahogany — 56.00 CAD — Out of stock
- 58 Mocha — 56.00 CAD — Out of stock
- 59 Burgundy — 56.00 CAD — Out of stock
- 60 Garnet — 56.00 CAD — Out of stock
- 61 Heritage Blue — 56.00 CAD — Out of stock
- 62 Baltic Blue — 56.00 CAD — Out of stock
- 63 Kelp — 56.00 CAD — Out of stock
- 64 Sage Green — 56.00 CAD — Out of stock
- 65 Mushroom Opaque — 56.00 CAD — Out of stock
- 66 Moss Green — 56.00 CAD — Out of stock
- 67 Chesapeake — 56.00 CAD — Out of stock
- 68 Hunter Green — 56.00 CAD — Out of stock
- 69 Forest Green — 56.00 CAD — Out of stock
- 70 Walnut — 56.00 CAD — Out of stock
- 71 State Blue — 56.00 CAD — Out of stock
- 73 Red Oak — 56.00 CAD — Out of stock
- 74 Ocean Bay Blue — 56.00 CAD — Out of stock
- 75 Atlantic Blue — 56.00 CAD — Out of stock
- 76 Blue Jay — 56.00 CAD — Out of stock
- 77 Indigo Blue — 56.00 CAD — Out of stock
- 78 Colonial Yellow — 56.00 CAD — Out of stock
- 86 Deep Orange — 56.00 CAD — Out of stock
- 87 Primary Red — 56.00 CAD — Out of stock
- 88 Muskoka Red — 56.00 CAD — Out of stock
- 89 Yellow Ochre — 56.00 CAD — Out of stock
- 90 Primary Yellow — 56.00 CAD — Out of stock
- 92 Heritage Red — 56.00 CAD — Out of stock
- 93 Federal Blue — 56.00 CAD — Out of stock
- 94 Hisbiscus — 56.00 CAD — Out of stock
- 95 Harbor Fog — 56.00 CAD — Out of stock
- 99 Starry Night — 56.00 CAD — Out of stock
- 101 Galaxy Blue — 56.00 CAD — Out of stock
- 103 Little Boy Blue — 56.00 CAD — Out of stock
- 105 Burnt Ochre — 56.00 CAD — Out of stock
- 113 Grinch Green — 56.00 CAD — Out of stock
- 114 Purple Rain — 56.00 CAD — Out of stock
- 115 Orange Tabby — 56.00 CAD — Out of stock
- 116 Pea Soup — 56.00 CAD — Out of stock
- 117 Mulligan Green — 56.00 CAD — Out of stock
- 118 Cinnabar — 56.00 CAD — Out of stock
- 119 Lipstick Pink — 56.00 CAD — Out of stock
- 120 Forever — 56.00 CAD — Out of stock
AI Readiness
Good foundation, but some important product data is still missing.