Effecting Music Tee Shirt | EHX Apparel

[vc_row type=”full_width_content” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” bg_color=”#ffffff” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” id=”features” row_name=”Features” disable_element=”yes” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none” shape_type=”” gradient_type=”default”][vc_column column_padding=”padding-11-percent” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”left-right” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][nectar_image_with_hotspots image=”214939″ preview=”https://www.ehx.com/wp-content/uploads/2026/05/DBBM2-.jpg” color_1=”Accent-Color” hotspot_icon=”plus_sign” tooltip=”hover” tooltip_shadow=”large_depth” animation=”true”][nectar_hotspot left=”51.1872%” top=”22.3966%” position=”right”] 9VDC Power Jack Current draw: 45mA at 9.0VDC, center-negative polarity.[/nectar_hotspot][nectar_hotspot left=”31.3233%” top=”35.4877%” position=”left”] VOLUME Knob Sets the output level of the DBBMP2 at the OUTPUT and DI OUTPUT jacks. As you turn this knob clockwise, your output signal gets louder.[/nectar_hotspot][nectar_hotspot left=”38.9416%” top=”35.7527%” position=”left”] BLEND Knob Mixes between the dry and distorted signals. Turn this knob fully counterclockwise for 100% dry signal and fully clockwise for 100% distorted signal. Setting the BLEND knob to noon yields a 50/50 mix of dry/distorted signal.[/nectar_hotspot][nectar_hotspot left=”45.9823%” top=”35.8284%” position=”left”] TONE Knob Provides a range of sounds from high treble to deep bass on the distorted effect only. As you turn the TONE knob clockwise, the bass response reduces and treble increases.[/nectar_hotspot][nectar_hotspot left=”52.858%” top=”35.8903%” position=”right”] SUSTAIN Knob Adjusts the amount of sustain, distortion, and fuzz.[/nectar_hotspot][nectar_hotspot left=”60.0683%” top=”36.2241%” position=”right”] GATE Knob Controls the input amplitude needed to open the noise gate. As you turn the GATE knob clockwise, the amount of gating increases, requiring a louder signal at the Input jack—after the Input switch—to open the gate and allow sound to pass through to the Output jack. Turning the GATE knob down all the way disables the noise gate function.[/nectar_hotspot][nectar_hotspot left=”67.2924%” top=”36.3549%” position=”right”] HPF CROSSOVER Knob When Crossover is engaged, the signal entering the distortion circuit is sent through a second-order high pass filter (HPF). The HPF knob adjusts the cutoff frequency of the high pass filter, ranging from 115Hz to 1kHz, with the frequency increasing as the knob is turned clockwise.[/nectar_hotspot][nectar_hotspot left=”61.1592%” top=”47.2228%” position=”right”] INPUT Switch When set to -10dB, this toggle switch engages 10dB of attenuation on the input to make the DBBMP2 friendlier to basses with active pickups. Set INPUT to 0dB for no attenuation on the input signal.[/nectar_hotspot][nectar_hotspot left=”67.4711%” top=”47.5635%” position=”left”] LPF CROSSOVER Knob When Crossover is engaged the dry signal is sent through a second-order low pass filter (LPF). The LPF knob adjusts the cutoff frequency of the low pass filter from 60Hz to 10kHz, with the frequency increasing as the knob is turned clockwise.[/nectar_hotspot][nectar_hotspot left=”71.2848%” top=”53.3485%” position=”right”] DIRECT OUT Jack This is a buffered output of the original, unaffected bass signal. You can connect this jack to an amplifier or different effects chain. Impedance: 550Ω.[/nectar_hotspot][nectar_hotspot left=”71.4315%” top=”66.5497%” position=”top”] INPUT Jack Audio Input Jack. Impedance: 2.2MΩ.[/nectar_hotspot][nectar_hotspot left=”26.696%” top=”65.008%” position=”top”] OUTPUT Jack Main Audio Output Jack. Impedance: 550Ω.[/nectar_hotspot][nectar_hotspot left=”65.4176%” top=”73.5873%” position=”top”] FOOTSWITCH AND STATUS LED The soft footswitch engages or bypasses the effect. The status LED lights red when the effect is engaged. The LED is off in bypass. The Deluxe Bass Big Muff Pi 2 employs buffered bypass. The footswitch includes a momentary action: pressing and holding the footswitch for more than half a second returns DBBMP2 to the previous state upon release.[/nectar_hotspot][nectar_hotspot left=”37.8438%” top=”72.9266%” position=”top”] CROSSOVER FOOTSWITCH AND STATUS LED The soft footswitch turns the Crossover circuit on or off. The status LED lights green when the Crossover circuit is active. The LED is off when disengaged. The footswitch includes a momentary action: pressing and holding the footswitch for more than half a second returns DBBMP2 to the previous state upon release.[/nectar_hotspot][/nectar_image_with_hotspots][/vc_column][/vc_row]