LED AR111 Spot Light Bulb 13W G53 230V

13W AR111 Spotlight CREE LED 3000K IP65 This professional 13W AR111 spotlight is designed as an energy-efficient replacement for traditional 50W and 75W AR111 halogen lamps. Using high-quality CREE LED chips, it delivers approximately 95 lm/W together with a warm 3000K light output and a controlled 38-degree beam angle. The spotlight is particularly suitable for retail shops, hotels, restaurants, galleries, showrooms and architectural accent lighting. Its anti-glare optical design provides comfortable, focused illumination, while the aluminium housing helps provide effective heat dissipation and long-term reliability. The AR111 spotlight is supplied with an external LED driver and is available in either non-dimmable or AC Triac dimmable versions. The non-dimmable version uses a Philips driver, while the dimmable version is supplied with a Lifud driver. Key Features 13W professional AR111 spotlight High-quality CREE LED chips Approximately 95 lm/W efficiency 3000K warm white colour temperature 38-degree controlled beam angle Anti-glare optical design CRI Ra83 for good colour reproduction IP65 waterproof and dust-resistant construction Durable aluminium housing Available as non-dimmable or AC Triac dimmable External LED driver supplied Philips driver with non-dimmable version Lifud driver with AC Triac dimmable version Class III appliance Risk Group 0 rated Up to 50,000 hours working life 5-year warranty Ideal Replacement for AR111 Halogen Lamps The 13W AR111 spotlight provides an efficient alternative to conventional AR111 halogen lamps. Its low power consumption can significantly reduce electricity usage while maintaining the concentrated light required for accent and display lighting. It is ideal for replacing older 50W and 75W halogen lamps where lower energy consumption, reduced heat output and a longer service life are required. The familiar AR111 format makes it suitable for many standard recessed and adjustable gimbal fittings commonly installed in shops, hotels, restaurants and other commercial interiors. 38-Degree Anti-Glare Beam A controlled 38-degree beam angle provides focused illumination without creating an excessively narrow spot. This makes the AR111 spotlight particularly effective for highlighting products, furniture, displays, artwork and architectural features. The anti-glare optical design helps reduce uncomfortable direct glare while maintaining effective illumination of the target area. The 3000K warm white colour temperature creates a comfortable and welcoming atmosphere, while the CRI Ra83 rating helps colours, products and materials appear natural and well defined. CREE LED Technology High-performance CREE LED chips provide an efficiency of approximately 95 lumens per watt, allowing the lamp to produce useful light output from only 13W of electrical power. The aluminium housing also acts as an effective heat sink, helping transfer heat away from the LED components and contributing to a rated working life of up to 50,000 hours. External Philips or Lifud LED Driver The AR111 spotlight uses an external LED driver, keeping the power electronics separate from the lamp head and helping improve thermal management and long-term reliability. Non-dimmable version: supplied with Philips LED driver AC Triac dimmable version: supplied with Lifud LED driver The AC Triac dimmable version is designed for installations where adjustable light output is required using a compatible mains Triac dimming system. Class III Electrical Protection The AR111 lamp head is classified as a Class III appliance. This means the spotlight itself operates from safety extra-low voltage supplied by its external LED driver. Protection against electric shock is therefore provided through the extra-low-voltage supply rather than relying on a protective earth connection to the lamp head. The mains-powered external driver must still be installed correctly and in accordance with applicable electrical installation requirements. Risk Group 0 The LED light source is rated Risk Group 0 for photobiological safety. This classification indicates that the light source presents no photobiological hazard under normal intended operating conditions. This makes the product suitable for commercial, retail and hospitality environments where lighting may remain in operation for extended periods. IP65 Aluminium Housing The aluminium housing has an IP65 rating, providing protection against dust and water jets. Its robust construction makes the AR111 spotlight suitable for a wider range of professional lighting environments. Please note that the installation location and protection requirements of the external LED driver must also be considered separately. Technical Specifications Product Type AR111 Spotlight Power 13W LED Chips CREE Efficiency Approx. 95 lm/W Colour Temperature 3000K Warm White Beam Angle 38 Degrees CRI Ra83 Dimming Non-Dimmable or AC Triac Dimmable Non-Dimmable Driver Philips Dimmable Driver Lifud Driver Type External LED Driver Housing Aluminium IP Rating IP65 Optical Design Anti-Glare Electrical Class Class III Photobiological Safety Risk Group 0 Rated Working Life Up to 50,000 Hours Warranty 5 Years Applications Retail shops and product displays Hotels and restaurants Showrooms Galleries and exhibitions Bars and hospitality areas Architectural accent lighting Residential feature lighting Adjustable AR111 gimbal fittings This 13W AR111 spotlight offers a reliable and energy-efficient upgrade from traditional halogen lighting, combining CREE LED technology, a 38-degree anti-glare beam, IP65 aluminium construction and a choice of non-dimmable or AC Triac dimmable operation.