Based on the VESC project, SKP brings you a compact, powerful, robust motor controller. The SKP Solo is a DRVless design. Power Specs: 4-18s li-ion safe operating voltage (16-75.6v) 80 AMP Battery current 140 AMP Motor current 6kw peak operating wattage For best results controller needs to be mounted to a heat sink exposed to airflow Features/info CAN,HALL,UART,PPM,IMU Built in Bluetooth On/off feature with any latching switch. 10AWG supply cable and xt90 male connector 12awg phase cable and 4mm female bullet connectors What you get: -Single 1 - SKP solo 1 - SKP solo single heatsink and housing 1 - SKP latching switch -Dual 2 - SKP solo 1 - SKP dual mount heatsink and housing 1 - canbus cable 1 - SKP switch wired to turn on/off both Solo controllers -For Top mount box dual 2 - SKP solo 1 - SKP dual mount heatsink for top mount box and housing 1 - canbus cable 1 - SKP switch wired to turn on/off both Solo controllers In this configuration the heatsink does not have airflow cooling ribs…it will bolt directly into a 3Dservisas top mount box, we suggest the taller box for best fitment. -Dual with top mount Box 2 - SKP solo 1 - SKP dual mount heatsink for top mount box and housing 1 - canbus cable 1 - SKP switch wired to turn on/off both Solo controllers 1 - 3Dservisas Top mount controller box -Metr add on unlock a power app to use with your Solo unit. Metr app allows access to live telemetry, preset ride mods, ride logging and soooo much more it’s impossible to list. Design Considerations: Going into this project in the middle of a silicon shortage was pretty ambitious, one of our design considerations was to make this Motor controller manufacturable under current and possibly worsening silicon conditions. We firmly believe the SKP Solo ESC has achieved that. We sourced components that are well stocked and are likely to remain well stocked, the controller is also designed in a way that allows for easy modification should any of the current components go out of stock and others need to be used instead. A huge consideration was power. After spending thousands of hours and thousands of miles riding a variety of motor controllers that are available to the market it became very evident that there was a need for a motor controller that can offer a bit more power to push our already incredibly powerful PEVs to the next level. Size and cost are a major consideration as well. Although you will find that the heat sink for the SKP solo makes the controller a bit taller than some of the controllers out there right now, it is still very compact and will fit most existing electric skateboards and PEVs and will reliably push your motors and your PEV to the next level.
Single, Dual, For Top mount Box Dual, Dual with top mount box, SKP Solo Metr Add on