Kinetico Supersoft Pro Water Softener

Kinetico SuperSoft Pro Water Softener Premium non electric twin tank water softener with high flow performance, compact installation and efficient salt based regeneration. Built for Whole Home Water Softening The Kinetico SuperSoft Pro is designed to reduce the effects of hard water throughout the home, helping protect plumbing, boilers, showers, appliances and bathroom fittings from limescale build up. It is suitable for homes that need a compact but capable softener with strong flow performance and a generous salt storage capacity. Benefits Performance Installation Downloads Specifications FAQs Why Choose the Kinetico SuperSoft Pro? High Flow Performance Designed for strong household water demand, with a listed flow range of 1.1 to 45 litres per minute. Large Salt Capacity The brine tank stores up to 25kg of tablet salt, helping reduce refill frequency. Efficient Regeneration Regeneration uses 26.5 litres of water and takes approximately 11 minutes. 1 Inch BSP Connections Supplied with 1 inch male BSP inlet and outlet connections for suitable installations. Installation Overview Bypass and Non Return Valve Setup The installation manual states that a bypass kit and non return valve should be fitted, and that the installation must comply with UK water regulations. The softener should be installed by a qualified installer and must be accessible for servicing and salt filling. Typical Installation Layout The manual shows a typical installation with main stop valve, hard water supply, non return valve, pressure reducing valve where necessary, bypass, inlet to softener, outlet from softener, drain and overflow arrangement. Downloads and Technical Documents View installation, commissioning, bypass and maintenance information before ordering or arranging fitting. Kinetico SuperSoft Pro User Manual Installation instructions, specifications, commissioning guidance, bypass instructions and maintenance information. View PDF Kinetico SuperSoft Pro Specifications Product Type Whole home water softener Model Kinetico SuperSoft Pro Dimensions 203 x 432 x 584 mm Weight 41 kg Brine Tank Dimensions 300 x 410 x 510 mm Maximum Hardness 804 mg/L Minimum and Maximum Flow 1.1 to 45 L/min Water Used Per Regeneration 26.5 litres Regeneration Time 11 minutes Salt Storage Capacity 25 kg tablet salt Inlet and Outlet Connections 1 inch male BSP Water Temperature 2°C to 50°C Water Pressure 1.8 to 6 bar Kinetico SuperSoft Pro FAQs Does the Kinetico SuperSoft Pro need a qualified installer? Yes. The manual recommends installation by a qualified installer. Incorrect installation could invalidate the warranty. What water pressure does the SuperSoft Pro need? The supply pressure must be at least 1.8 bar. If pressure exceeds 6 bar, a suitable pressure reducing valve must be installed. How much salt does the brine tank hold? The brine tank has a listed salt storage capacity of 25kg and is designed for tablet salt. Can I use rock salt or granular salt? No. The manual states that only salt made for use in water softeners should be used. Rock, solar or granular salt can interfere with performance and may invalidate the warranty. How do I know when to add salt? You can add salt whenever there is enough room in the brine tank. Does the SuperSoft Pro need maintenance? Yes. The manual recommends annual service and inspection to maintain optimum system performance. Explore More from Regal Flow View Kinetico Water Softeners and RO Systems View All Water Softeners Need Help Choosing the Right Water Softener? Not sure about flow rate, water pressure, installation space, bypass setup or salt requirements? Speak with our technical team before ordering and we will help you check the details. Contact Support Team Email Support: info@regalflow.co.uk Telephone Direct: 0121 630 1130 WhatsApp Chat: Click here to message our technical team instantly