Specialty Cut and Hinged Skeletal Deer Resin Mask Blank

Fits up to a 23" head, if having us install padding/chin cup/elastic we can make it fit up to 25" Will not fit a fan but has excellent ventilation Springs are 1/2 attached at the time of shipping, allowing you to do whatever work you need to do on them before you attach them fully. (So they don't get stretched out and lose effectiveness.) You can check out this video HERE to see how to finish attaching them! UV Masks are bright, neon colored masks in the color of your choosing, and glow under a blacklight. The color it glows is directly related to the visible color, so you can't have a UV green mask that glows orange. Glitter skulls are slush cast glitter layers with the last layer being a deeply dyed color to match the glitter, with a layer of black behind that for anti-glare inside the mask. Granite skulls are lightly dyed and have granite powder mixed in, giving them a stony look. Shimmer mask options: Brush In: We "paint" the shimmer into the mold and then cast behind it so the shimmer gets the most effect.The shimmer can be scratched off over time, so try to keep the mask from scraping against things too much! Mix in: The shimmer powder is mixed into the resin so it can't be scraped off but it's slightly dulled, and there could be visible microbubbles and swirls. To finish it off, you can use some speaker cloth to cover the eye ports. There are two colors of stain to choose from for staining, Black or Brown. They are acrylic paint mixed with staining medium, and applied with a paint brush. They will also come sealed with a Krylon matte spray paint. There are slight variations to staining density/darkness due to the fact that these are hand painted each time, however pictures will show a general look. Padding can be added for comfort on the inside, and you can use some elastic around the back of the head to hold it on! *our springs are made with a zinc plated wire and are custom ordered as such so will never rust, nor need oiling. Positioning of the springs on a mask varies per person, since each person is typically shaped differently, and the spring needs to be positioned according to that and the specific tension they need*