CT-LB300-12-90 Copper Compression Lug — 90° Pad, Long Barrel, 1-Hole, 300 kcmil, 1/2 in Stud, Tin-Plated

The Conversions Tech CT-LB300-12-90 is a one-hole long-barrel compression lug with a 90° pad for terminating 300 kcmil Class B stranded copper conductors where the conductor approaches perpendicular to the termination surface — transformer pads, switchgear bus, panelboards, and equipment with tight bending space. The right-angle pad eliminates severe cable training bends, reducing sidewall pressure and gutter fill. The barrel is seamless high-conductivity electrolytic copper, electro tin-plated, with a chamfered entry; the extended barrel accepts two crimps for maximum pull-out strength. Each lug is stamped with conductor size, die index, and color code. Key Specifications Catalog Number CT-LB300-12-90 Connector Type Compression lug, long barrel, 90° pad, chamfered entry Conductor 300 kcmil copper, Class B (Code) stranded • also 300 (91) Navy Stud / Hole 1/2 in stud • Ø0.53 in (13.5 mm), 1-hole Pad 90° angle, 1.20 in wide Barrel 2.00 in long, Ø0.81 in OD • 2 crimps Overall (L × H) 1.61 in (41 mm) × 2.89 in Strip Length 2-1/16 in Die / Color Code Die index 17 (alt. U-die 298) • White — standard U-type 12-ton dies Voltage Rating 600 V – 35 kV max (with proper spacing and insulation) Temperature Rating 194°F (90°C) Material / Finish Seamless electrolytic copper, electro tin-plated Certifications UL Listed 486A-486B • CSA Certified • RoHS Compliant Features 90° pad eliminates severe cable training bends in tight gutters Seamless electrolytic copper — maximum conductivity and ductility Long barrel accepts two crimps for superior pull-out strength Chamfered barrel entry eases conductor insertion White color code and die index 17 (alt. 298) stamped on every barrel Rated 600 V through 35 kV Cross-Reference Manufacturer Catalog No. Notes Burndy® YA3090 Direct equivalent — 90° pad, long barrel, white / die 17 or 298 Panduit® LCA300-12F-X Functional equivalent — 1-hole 90° pad; standard (shorter) barrel Trademarks are property of their respective owners and used for cross-reference identification only. Verify die selection and barrel length with your tooling manufacturer. Install per NEC and applicable local codes. Crimp with a calibrated compression tool using die index 17 (alt. 298). For circuits above 600 V, apply proper high-voltage spacing and insulation techniques.