Soap Holder Mini | SLOY Studio

SLOY STUDIOSmall bathroom, big effect – the compact soap holder that brings order where space is tight.The SLOY Studio Soap Holder Mini is the compact version of the SLOY classic – and the founding piece of the entire SLOY family. It keeps your soap bar dry and draining, while the built-in reservoir catches water and residue. Ideal for small bathrooms, narrow tiled areas, or right above the sink. 3D printed from plant-based PLA, hand-assembled in Hamburg.Plant-based PLA · Compact format · Wall-mount, no drilling · Built-in reservoir · 6 colours · Made in HamburgFor small bathrooms and conscious mindsNot every bathroom has room for large shelves. The Soap Holder Mini is made for exactly that: slim, compact, stuck to the wall – and still doing everything the larger version does. The soap rests raised and dry, and the reservoir below keeps the tile clean. No mush, no puddle, no wasted bar.As a small gift, the Mini suits everyone who has switched to solid soap – for a first apartment, as a little something to bring along, or as a coherent set with a good soap. Small in format, thoughtful in detail.Mounting without drillingLike all SLOY products, the Mini comes with a separate wall mount fitted with a pre-applied industrial acrylic foam adhesive strip. On a clean, solid surface it holds permanently – even in a humid shower. Clean the surface free of grease and dust beforehand and allow the adhesive up to 72 hours to cure. Never mount on wallpaper, loose plaster, or porous surfaces.Product details Product typeWall-mounted soap holder, compact MaterialPLA (plant-based, 3D printed) Dimensions8.2 × 8.3 × 8.5 cm MountingPre-applied adhesive tape – no drilling Package includes1 Soap Holder Mini, 1 wall mount with adhesive ColoursLava Red, Banana, Mint, Marble Terracotta, Marble Teal, Charcoal Black (Exclusive) OriginHamburg, Germany Frequently asked questionsHow small is the Mini compared to the regular Soap Holder?The Mini measures around 8.2 cm wide, making it noticeably more compact than the larger Soap Holder at 13.3 cm. It is particularly suited to small bathrooms, narrow tiled areas, or the spot right above the sink.Do I need to drill to mount it?No. The included wall mount has a pre-applied industrial adhesive strip. Clean the spot, press it on, let it cure for up to 72 hours – after that the Mini holds permanently, even in damp conditions.What material is the Mini made of?PLA, a plant-based bioplastic from renewable raw materials such as corn starch. Each piece is 3D printed and hand-assembled in Hamburg. Industrially compostable according to ISO 14855, not in a home composter.Does the Mini match the other SLOY products?Yes. The Mini shares silhouette, colour palette and material with the Soap Holder and the Hook. Several pieces combine freely into a coherent bathroom set.Can I order the Soap Holder Mini as a corporate gift?Click “Corporate Gifts” in the top menu — all details on quantities, terms and personal advice are there.Compact, thoughtful, sustainable – the Soap Holder Mini for small bathrooms and conscious gifts.SLOY STUDIOThe founding piece of the SLOY family – pill-shaped, plant-based, compact.The Soap Holder Mini is the compact version of the SLOY soap holder and the original object the entire SLOY family grew out of. Same pill-shaped silhouette, same colour palette, same plant-based material as the Soap Holder and the Hook – just in a smaller format. 3D printed and hand-assembled in Hamburg.Plant-based PLA · Compact format · Pill-shaped silhouette · Built-in reservoir · 6 colours · Made in HamburgMaterial and designThe Mini is printed consistently from PLA, a bioplastic made from renewable raw materials. Its fine print texture and reduced, pill-shaped form give it a calm, considered presence. Beneath the resting surface, a reservoir catches water and soap residue and keeps the tile dry.Available in Lava Red, Banana, Mint, the marble tones Terracotta and Teal, plus an exclusive Charcoal Black. In its compact format, the Mini fits into small bathrooms without taking over.MountingA separate wall mount with a pre-applied industrial acrylic foam adhesive strip is included. On a solid, clean surface the bond is permanent, even in damp conditions. Allow up to 72 hours to cure before loading. Porous surfaces, wallpaper, or loose plaster are unsuitable.Product details Product typeWall-mounted soap holder, compact MaterialPLA (plant-based, 3D printed) Dimensions8.2 × 8.3 × 8.5 cm MountingPre-applied adhesive tape – no drilling ColoursLava Red, Banana, Mint, Marble Terracotta, Marble Teal, Charcoal Black (Exclusive) OriginHamburg, Germany Frequently asked questionsHow does the Mini differ from the larger Soap Holder?At around 8.2 cm wide, the Mini is more compact and intended for small bathrooms or narrow areas. Material, silhouette and mounting are identical to the larger Soap Holder.How is the Mini mounted?Via a separate wall mount with pre-applied industrial adhesive – no drilling. The surface must be solid, clean and non-porous; the adhesive cures for up to 72 hours.What material is the Mini made of?Plant-based PLA from renewable raw materials, 3D printed and hand-assembled in Hamburg. Industrially compostable according to ISO 14855, not in a home composter.Can the Mini be combined with other SLOY pieces?Yes. Mini, Soap Holder and Hook share silhouette, colours and material, and combined they make a coherent bathroom ensemble.The founding piece of the SLOY family – compact, plant-based, consistently designed.