Cabot 300 Series Semi-Transparent Deck & Siding Stain + Sealer – 1 Gallon
Cabot 300 Series Semi-Transparent Stain + Sealer is a deep-penetrating, oil-based exterior stain that adds lasting color while letting the natural grain and texture of the wood show through. Because it soaks into the wood instead of forming a film on top, it won't crack, peel or blister — it simply weathers and is recoated. One coat is all it takes. Key Features Semi-transparent finish — colors the wood without hiding grain or texture Oil-based, deep-penetrating alkyd formula that resists cracking, peeling and blistering One-coat application with water repellency and UV fade resistance Tintable to 100 Cabot colors - add your desired color or color code at checkout Especially effective on rough-sawn lumber, cedar, redwood, cypress, pine, fir and plywood panel siding Coverage Smooth surfaces: approx. 400–650 sq. ft. per gallon Rough or weathered surfaces: approx. 150–300 sq. ft. per gallon Spread rate varies with wood porosity and surface condition Recommended Uses Exterior siding, fences, shingles, shakes, trim and log homes. Application Notes Apply when air and surface temperatures are between 50°F and 90°F. Use a quality stain brush or pad applicator; if spraying, back-brush each section immediately for uniformity. To avoid lap marks, start at one edge of a board and carry through to the end. Do not thin. Clean brushes and equipment with mineral spirits. Maintenance Evaluate for recoating every 3–5 years depending on sun exposure and wear. Available Sizes 1 gallon. Select bases also available in 5 gallon — contact us for pricing.