DS18 NVY 6.5” Neodymium Coaxial Loudspeakers - 200 Watts Rms 4-Ohm

Built For All Elements The NVY-6CKEVLAR-N4 is a premium 6.5" coaxial speaker, engineered to deliver the full-range of frequencies in motorcycle and powersports builds. Made for Motorcycles With a shallow 2.6” mounting depth on standard 6.5” sizing, and dual push terminals for simplified wiring and advanced tuning, the NVY-6CKEVLAR-N4 slides cleanly into factory locations and fairings. Hybrid Tweeter Design At the center of the speaker is a patent pending tweeter assembly designed to mimic the output and dispersion of a compression driver. The sealed soft rubber surround acts as a barrier for the tweeters internals. NVY-Grade Durability A Kevlar-reinforced woofer cone offers the perfect mix of rigidity and responsiveness for higher SPL, louder output, and deeper tones than standard paper cones. Wrapped in a marine-grade aluminum basket, the entire assembly is IP65-rated waterproof and UV resistant for long-haul durability. Specifications Nominal Diameter: 6.5" / 165mm Nominal Impedance: 4 Ohms RMS Power Handling: 200W MAX Power Handling: 400W Sensitivity (1w/1m): 95dB Frequency Response: 80Hz-20kHz Recommended High-Pass Crossover: 120Hz Number of Ways: 2-Way Water-Resistant Rating: IP65 Cone Shape: Curvilinear Speaker Terminals: Dual Push 16ga (TW/WF) Sold as Pair Woofer Specifications Voice Coil Diameter: 2” / 50.6 mm Voice Coil Former Material: Fiber Glass Winding Material: CCAW Cone Material: Kevlar Surround Material: Cloth Basket Material: Aluminum Basket Color/Finish: Black Corrugated Magnet Material: Neodymium Magnet Weight: 8.8 Oz Thiele & Small Parameters Equivalent Volume Vas: 2.38L / 0.84ft3 Excursion (one way) Xmax: 1.2mm Free Air Resonance Fs: 171Hz Mechanical Factor Qms: 13.31 Electrical Factor Qes: 0.61 Total Factor Qts: 0.58 Moving Mass Mms: 9.974g Mechanical Compliance Cms: 0.079 mm/N BL Factor BL: 8.42 Diaphragm Area Sd: 132.73cm2 DC Resistance Re: 3.2 Ohms Tweeter Specifications Nominal Diameter: 1.35" / 34mm Voice Coil Diameter: 1" / 25.4mm Voice Coil Material: Kapton Winding Material: CCAW Diaphragm Material: Aluminum Magnet Material: Neodymium (N38H) Magnet Weight: 0.44 Oz Measurements Overall Diameter: 6.5" / 165mm Overall Depth: 2.9" / 73.5mm Front Mount Baffle Cutout: 5.6" / 143.5mm Mounting Depth: 2.6" / 66mm Motor Diameter: 3.6" / 92mm