Procella Audio - DA08-DSP - Amplifier

The DA08-DSP is massive output power amplifier and has the horsepower to bring out every ounce of performance designed into each of Procella’s high-output speaker and subwoofer models. Procella’s DA08-DSP can be used as a four-channel amplifier to produce 4x 800W (8 ohms) and 4x 1600W (4 ohms), but switch to bridge mode, and it will deliver 2x 3200W (8 ohms) and 2x 5800W (4 ohms)! In a single rack unit, this power station ensures maximum output and dynamic range, especially for Procella subwoofers. 40 factory presets enable multiple configurations with Procella’s high output speakers and subwoofers. Specification Details Output Power @ 4Ω / 8Ω 4 × 800W Max. Output Current 45A peak Signal-to-Noise Ratio >105 dB A-weighted, 20 Hz – 20 kHz, 8 Ω THD+N (Typical) <0.05% (20 Hz – 20 kHz, 8 Ω load, 3 dB below rated power) Frequency Response 20 Hz – 20 kHz (+0 / -0.5 dB, 8 Ω load, 3 dB below rated power) Protection Circuits Short circuit protection, DC protection, limiter, under-voltage protection, over-temperature protection, overload protection Operating Voltage / Frequency Universal mains, 90–260V, 50–60Hz DSP for All Channels 40 selectable presets, level, parametric EQ, delay, matrix limiter Carton Content Mains power cable, 4 × adhesive rubber feet, user guide Dimensions & Net Weight 483 × 45 × 370 mm (1U) / 19” × 1.7” × 14.6”, 9.0 kg / 19.8 lbs Shipping Carton & Weight 570 × 135 × 515 mm / 22.44” × 5.31” × 20.28”, 10 kg / 22.05 lbs Assembly Designed from the ground up by Procella Audio