Goulds Shallow Well Jet Pumps - JS+ and JRS Series

Description """""" Goulds Water Technology Shallow Well Jet Pumps NSF-certified shallow well jet pumps for wells to 25 ft — JS+ and JRS series. Cast iron, integral jet, 0.5–1.5 HP, 115/230V single phase. NSF/ANSI 61 & 372 Shallow Well JS+ & JRS 0.5–1.5 HP Integral Jet Built in USA Overview Goulds shallow well jet pumps draw water from wells with a maximum suction lift of 25 ft. This listing covers two series: the JS+ (0.5–1.5 HP), built in the USA with an integral shallow-well jet and a stainless diffuser wear ring; and the value JRS (0.5–1 HP), with an O-ring casing seal and a drain plug for easy winterizing. Both are NSF/ANSI 61 & 372 certified for drinking water. Select your series and horsepower from the options above. Key Features Compact / Integral Jet Shallow-well jet built into the casing — no separate adapter required (JS+). Serviceable Back pull-out design, two-compartment motor, and nozzle clean-out plug. FDA-Compliant Impeller Glass-filled engineered composite — corrosion and abrasion resistant. Corrosion Resistant Electrocoat paint process applied inside and out, then baked on. Protected Mechanical Seal Diaphragm design keeps water in the casing so the seal never runs dry. Drain Plug (JRS) Accessible drain plug for easy winterizing and maintenance. Excellent Air Handling Re-primes itself once water rises above the foot valve. NSF Listed Certified to NSF/ANSI 61 & 372 for drinking water systems. Specifications Pump Type Shallow well jet (centrifugal with jet) Suction Connection 1¼? NPT Discharge Connection 1? NPT Pressure Switch AS4, preset 30–50 PSI Motor NEMA standard, 60 Hz, 3500 RPM, single phase, capacitor start Voltage 115/230 V; built-in overload with automatic reset Shaft / Rotation Stainless steel; clockwise viewed from motor end Maximum Suction Lift 25 ft Maximum Temperature 140°F (60°C) Casing Cast iron, electrocoat finish Agency Listings NSF/ANSI 61 & 372, CSA, UL listed Models in This Listing Series Model HP Stages Weight Notes JS+ J5S 0.5 1 43 lb Integral jet, built in USA JS+ J5SH 0.5 1 43 lb High pressure JS+ J7S 0.75 1 47 lb Integral jet JS+ J10S 1 1 50 lb Integral jet JS+ J15S 1.5 1 60 lb Integral jet JRS JRS5 0.5 1 37 lb Value line, drain plug JRS JRS5H 0.5 1 37 lb High pressure JRS JRS7 0.75 1 42 lb Value line JRS JRS10 1 1 47 lb Value line Performance JS+ Peak Capacity Up to 26 GPM JRS Peak Capacity Up to 27 GPM Maximum Suction Lift 25 ft (vertical lift + friction loss) Detailed Ratings See the Data Sheet & Technical Brochure for GPM by model, discharge pressure and suction lift. ? Confirm Before OrderingShallow well pumps are for a maximum suction lift of 25 ft (vertical lift plus friction loss). Verify series, horsepower and supply voltage before ordering. A pressure tank is required on all systems. Never run the pump dry. Wire and ground per local and National Electrical Code requirements. """ Ready to Order? Confirm HP and your well type before placing your order. Shop Watermainsupply.com 281.664.8000 sales@watermainsupply.com © Watermain Supply — A division of E4 Industrial LLC """ Data Sheet Data Sheet Product Data SheetManufacturer brochures with features, materials, ratings and dimensions for the series in this listing. Opens in a new window. Pump Data Sheet Technical Details Technical Details Technical BrochureFull technical brochures — applications, specifications, performance ratings, fittings and agency listings. Opens in a new window. Pump Technical Details Instruction Manual Instruction Manual Installation, Operation & Maintenance ManualOfficial Goulds Water Technology Jet Pump IOM (Doc. IM102R13) — system selection, piping, wiring, priming and service. Opens in a new window. Pump Instruction Manual