8 oz Refill- UV-Cured Wood Crack & Knot Filler

Lite n Done UV-Cured Wood Crack & Knot Filler (8 fl oz) Refill Stop fighting runny super glue, long epoxy cure times, and messy hot glue fills. Lite n Done UV-Cured Wood Crack & Knot Filler is a thick, non-run filler made to fill common wood defects cleanly—then cure rock-hard in seconds with a UV/LED curing light. It stays where you place it, builds in layers, and gets you back to sanding and finishing fast. Why woodworkers switch from CA Glue.. Won't bubble when you cure it. No toxic accelerator needed. Thick viscosity formula: fills without wicking away. Consistency of thick honey. Cures harder than epoxy in seconds (with light): fast repairs, less downtime Wide-range UV compatibility: cures with 365–395nm UV/LED lights Precision application: metal needle tip for fine control and clean fills. Less waste. Clog-resistant storage: each 8 oz applicator includes a metal wire stopper to clear the needle tip, keep the product fresh, and block light from entering Sandable immediately: hard, crisp fill that feathers cleanly No mixing: use what you need, cap it, and keep moving Layer-friendly: ideal for controlled, clean builds in deeper defects Best for filling Cracks, checks, and splits- Knots and sap pockets- Voids and gaps- Nail holes /Worm holes / Insect holes- Chip-out and tear-out pockets (routing/planing mishaps)- Edge voids (including plywood voids)- Open seams between boards where you need a hard, sandable fill What it’s like to use This filler has a consistency similar to honey, so you can pack and shape it without it running—especially helpful on edges, vertical surfaces, and knots where thin fillers disappear. How to use Prep: Remove dust and loose fibers. Surface should be dry. Fill: Pack the defect slightly proud of the surface. Cure: Expose to a UV/LED curing light (365–395nm) until fully hard, usually 10-30 seconds or less. Finish: Sand flush and apply finish as normal. Tip: For deeper voids, fill in 1/16" layers—cure each layer before topping off. Specs Size: 8 fl oz (237 mL) No VOC formula Includes: 1 × 8 oz applicator bottle + metal needle applicator tip + wire stoppers/ clog clearing Type: UV-cured wood filler (thick viscosity) Cure range: 365–395nm UV/LED Finish: Hard, sandable surface, ready for finish. Larger sizes available. (Gallon)- Inquire