Adhesive Bandages, Sterile Tan Fabric Band-Aids 1 x 3", 100/Box

Sterile Adhesive Bandages 1 × 3 inch Intended Use: These sterile adhesive bandages are designed for first aid of minor skin wounds. They consist of a cloth (fabric) strip with a sticky backing and a central absorbent pad. Their primary function is to cover and protect small cuts, scrapes, or abrasions, keeping the wound clean and reducing infection risk. (FDA defines an adhesive bandage as a fabric strip coated with adhesive, ‘used to cover and protect wounds.) After cleaning a minor wound (with soap and water or antiseptic), apply the bandage over it. Note: For deep lacerations, heavy bleeding, puncture wounds, or embedded debris, a bandage alone is insufficient – prompt medical care is recommended instead. Construction & Material: The bandage has a flexible, breathable tan-colored fabric backing (typically cotton or blend) coated with a medical-grade adhesive on one side. In the center is a sterile absorbent pad (gauss) that wicks blood or exudate. As one product description notes, the “flexible woven fabric stretches to move with you” and “covers and protects cuts, scrapes and blisters”. Tan (beige) is a neutral skin-tone shade to make the bandage less conspicuous on many skin types. The adhesive is usually hypoallergenic; many modern fabric bandages are latex-free (some packaging will state “not made with natural rubber latex”. Size & Packaging: Each bandage measures 1 inch by 3 inches (≈2.5 × 7.5 cm). This rectangular size is suitable for moderate-length wounds (e.g. finger or hand cuts, knuckle scrapes). The bandages are individually wrapped and sterilized. “Sterile” indicates that before opening, no bacteria or pathogens are present on the pad or adhesive. After opening, apply immediately; do not reuse. The product is single-use only – discard each bandage after removal. Application: To apply, first stop bleeding (e.g. with gentle pressure) and clean the wound thoroughly. Dry the surrounding skin. Place the pad directly over the injury and press the adhesive edges onto intact skin so the pad covers the wound completely. It should lie flat without gaps. According to first-aid guidelines, cover a clean minor wound with a sterile bandage to prevent infection. You may apply a thin layer of antibiotic ointment under the pad to further protect against germs. Keep the bandage in place; if it loosens or gets wet, replace it. Change the bandage at least once per day (or sooner if it becomes dirty or soaked). Regularly checking and changing the dressing helps healing by preventing moisture build-up and maintaining cleanliness. Once the wound has formed a protective scab, daily coverings may no longer be needed. Precautions: Monitor for skin irritation under the adhesive. If redness, itching, or swelling extends beyond the pad, discontinue use. Check whether the bandage adhesive contains latex if you have a known latex allergy – many products explicitly note “not made with latex”. Do not wrap the bandage too tightly; ensure it doesn’t cut off circulation. Keep the bandage dry; change it promptly if it becomes wet (to prevent maceration). If the wound shows signs of infection (increased pain, heat, redness, swelling or pus) or does not improve, remove the bandage and seek medical advice. Always use bandages only on wounds appropriate for simple dressing – per medical advice, deep cuts or heavy bleeding require more than a simple adhesive bandage. Summary: In summary, sterile 1×3″ tan fabric bandages are basic wound-care supplies. They combine a cloth backing and absorbent pad to cover minor wounds. Proper use (clean wound, apply bandage, change daily) follows standard first-aid protocols. When used as directed, these bandages help keep small cuts and abrasions clean and protected during healing (for example, product literature notes they “cover and protect cuts, scrapes and blisters”