ISODAMP C-1002

The high internal damping of the ISODAMP C-1002 material from Aearo Technologies reduces mechanically or acoustically induced vibrations and dissipates shock and impact energy at a very rapid rate. These properties helps make this material ideal for damped isolation and impact control applications. 54" width in four thicknesses, with or without PSA (PSA700). Includes FAA burn certificate for FAA 25.853(a) Vertical Burn. Quantities thicker than 0.06" or over 10' long require a Special Order. Sold in foot-lengths, 10' rolls, or full rolls for certain variants: C-1002-03: 120' full roll C-1002-06: 120' full roll C-1002-06 PSA: 120' full roll C-1002-12: 60' full roll Technical Data Sheet Specifications Material Vinyl Solid Color Blue Width 54 inches Length Up to 10' Nominal Thickness C-1002-03: 0.035" C-1002-06: 0.062" C-1002-12: 0.125" C-1002-25: 0.25" Nominal Hardness (ASTM D2240) 54, fifteen second post impact at 73°F, Type A Durometer Dynamic Properties (ASTM D4065) 5°F (-15°C) at 10 Hz, 0.3% Amplitude, Glass Transition Temperature Compression Set (ASTM D395 Method B) 16%, 22 hours at 72°F (22°C) 58%, 22 hours at 158°F (70°C), 122°F (50°C) Compression Load Deflection (ASTM D 3574-03 Test C) 57 psi (393 kPa) @ 10% compression 166 psi (1,145 kPa) @ 20% compression 358 psi (2,468 kPa) @ 50% compression Tensile Strength 1,300 psi (8,963 kPa), 51 cm/min (20 in/min) at 72 ̊F (22 ̊C) Tear Strength (ASTM D624) 197 lbf/in, 35 kN/m Peak Damping Performance Temperature Range (ASTM D4065) 9 ̊F to 99 ̊F (-13 ̊C to 37 ̊C) Loss Factor above 0.3% Strain in Shear Mode at 10Hz Shelf Life 60 months from date of manufacturing PSA: 24 months from date of manufacturing Recommended Maximum Intermittent Temperature 180°F (82°C) Maximum Continuous Service Temperature 158°F (70°C) Flammability and other tests 14 CFR (FAR) 25.853(a), Vertical Burn 14 CFR (FAR) 25.853(a) Appendix F Part VI (for PSA varieties on aluminum - top) California Technical Bulletin 117 FMVSS 302 (Automotive) Compatibility This product greatly exceeds automotive flammability standards. More cost-effective (but more flammable) alternatives may be available. This product is recommended for use in all types of aircraft. This product is recommended for use in marine applications. It has excellent characteristics to resist water absorption. Unknown at this time whether this material is acceptable for use in Railway applications.