In-Ground Post for Temporary Fence Panels 8 ft, 1-5/8" Hot-Dip Galvanized - ANTCORE-POST8

Ordering & Shipping InformationSold as an individual post. Couplers (ANTCORE-CLAMP) are required for installation and sold separately: 4 per post.Product DescriptionLock your temporary fence line into the ground. The ANTCORE-POST8 8' In-Ground Post is driven 2' into the soil, leaving 6' above grade to line up with 6' temporary chain link fence panels. Use it as a driven line post between panels, or add it mid-panel as a wind brace on exposed, screened, or long-term job sites.How It Works Mark your line. Set out your ANTCORE-600 panels where the fence will run. Drive the post. Drive the post 2' into the ground with a manual or powered post driver. That leaves 6' above grade, the same height as a 6' panel. Attach the panels. Clamp the panel frames to the post with 4 ANTCORE-CLAMP couplers. Check the line. Make sure the panels are plumb and the couplers are tight before you hang privacy screen or signs. Wind Bracing: The Most Common UsePrivacy screen and banners turn a fence line into a sail. To stiffen a run, drive one post at every second panel, at the middle of the panel, and clamp it to the panel's vertical support tube with couplers. The post adds a fixed anchor point in the ground along the fence line. This is how most of our customers use it: as extra stability for screened or windy sites.Specifications Product code ANTCORE-POST8 Overall length 8' (96") Embed depth 2' (24") Height above grade 6', matches 6' panels Outside diameter 1-5/8" Material Heavy-duty steel, hot-dip galvanized Couplers per post 4 ANTCORE-CLAMP (sold separately) Compatible panels ANTCORE-600 (6' × 12') What's Included1 × ANTCORE 8' In-Ground Post.Sold separately: ANTCORE-CLAMP couplers, ANTCORE-600 panels, ANTCORE-STAND tube stands, and privacy screen.FAQHow deep does the post go into the ground? 2'. The 8' post then stands 6' above grade, level with a standard 6' temporary fence panel.How many couplers do I need? 4 ANTCORE-CLAMP couplers per post.How many posts do I need for wind support? Most customers drive one post at every second panel, at mid-panel, clamped to the panel's vertical support tube. On very exposed sites you can add more.Can I use it with 8' panels? This post is sized for 6' panels. Contact us at BarrierHQ.com for 8' fence applications.Before you drive: always call 811 to have underground utilities located before driving any post.