Subaru NoN Amplified NoN Premium Sound Plug N Play Audio Kits

I OFFER MANY DIFFERENT KITS FOR ADDING A SUB , ADDING A 4 CHANNEL AMP OR ADDING A DSP AND OR FULL SYSTEM ETC . AS WELL AS MY PLUG & PLAY KICKER AND OTHER PRODUCTS . COMPATIBILITY CHART . PLEASE CONTACT US IF YOU DO NOT SEE YOUR YEAR AS IT MAY BE AVAILABLE. COMPATIBILITY CHART . PLEASE CONTACT US IF YOU DO NOT SEE YOUR YEAR AS IT MAY BE AVAILABLE. 2013-2023 SUBARU BRZ ALL TRIM LEVELS — 2016-2023 SUBARU CROSSTREK ALL TRIM LEVELS — 2016-2023 SUBARU FORESTER ALL TRIM LEVELS — 2015-2023 SUBARU IMPREZA ALL TRIM LEVELS — 2015-2023 SUBARU LEGACY ALL TRIM LEVELS — 2015-2023 SUBARU OUTBACK ALL TRIM LEVELS — 2016-2025 SUBARU WRX ALL TRIM LEVELS — USE THE DESCRIPTIONS BELOW AND THE DROP DOWN MENU ABOVE TO SELECT YOUR KIT . THIS IS THE ORDER AND DESCRIPTION OF THE DROP DOWN MENU SUB CONVERTERS WITH PLUG & PLAY HARNESS FOR ADDING BASS AMP KITS KIT 1 ( GOOD ) KICKER SUB CONVERTER WITH REMOTE WIRE $60 KIT 2 PLUGNPLAYKITS PNPKITSPRO PREMIUM ACTIVE 2 CHANNEL LOC WITH 6 FT HARNESS WITH BUILT IN LOAD RESISTORS & BASS BOOST AND COMPENSATION TECHNOLOGY . BASS X RESTORES BASS ROLL OFF, GROUND ISOLATION & CLIP LIGHT & BASS KNOB WITH VOLT METER $ 170 • 2 channels of speaker level inputs (up to 40V input handling) • 2 channels of RCA level outputs • 2 channels of BASS outputs • Bass boost and compensation technology • Clip indicator • Up to 9.5V of output • 12V trigger output • Level matching controls • Turn-on mode selection (Remote, DC, Audio) • On-board load resistors selection (20Ω, 60Ω, 20kΩ) • Ground isolation selection (GND, ISO or 200Ω) • Remote level controller with voltage display KIT 3 PLUGNPLAYKITS PNPKITSPRO PREMIUM ACTIVE 2 CHANNEL LOC WITH 17 FT HARNESS WITH BUILT IN LOAD RESISTORS & BASS BOOST AND COMPENSATION TECHNOLOGY . BASS X RESTORES FORD BASS ROLL OFF, GROUND ISOLATION & CLIP LIGHT & BASS KNOB WITH VOLT METER $ 180 • 2 channels of speaker level inputs (up to 40V input handling) • 2 channels of RCA level outputs • 2 channels of BASS outputs • Bass boost and compensation technology • Clip indicator • Up to 9.5V of output • 12V trigger output • Level matching controls • Turn-on mode selection (Remote, DC, Audio) • On-board load resistors selection (20Ω, 60Ω, 20kΩ) • Ground isolation selection (GND, ISO or 200Ω) • Remote level controller with voltage display KIT 4 KICKER KEYLOC WITH 3FT HARNESS $240 KIT 5 KICKER KEYLOC WITH 17FT HARNESS $250 KIT 6 LINE OUTPUT CONVERTER HARNESS ONLY 6FT $80 KIT 7 LINE OUTPUT CONVERTER HARNESS ONLY 17FT $95 KIT 8 RECOIL D11700.4 COMPACT 4 CHANNEL CLASS D AMP WITH RCA SUB OUTPUT WITH PLUG & PLAY HARNESS. $480 Specifications: RMS power @ 4 ohm (14.4V): 4 x 110W RMS power @ 2 ohm (14.4V): 4 x 160W RMS power @ 1ohm (14.4V): N/A RMS power @ 4 ohm mono (14.4V): 2 x 340W Frequency Response: 10Hz-24KHz Signal to Noise: 85dB Efficiency @ 4 ohm: 78% Input Sensitivity: 0.2V-12V High Pass Filter: 3OHz -300Hz Low Pass Filter: 3OHz-300Hz Fuse Rating (ATC): 50A Dimensions (mm): 6.22″ x 5.37″ x 2.09″(158mm x 136.5mm x 53mm) KIT 9 RECOIL D111400.5 COMPACT 5 CHANNEL CLASS D AMP WITH PLUG & PLAY HARNESS . COMES WITH BASS KNOB WITH POWER LIGHT & CLIP LED .$620 FITS UNDER THE FRONT SEATS WITH STINGER BRACKET OR DR SIDE REAR QUARTER PANEL 4 Way Protection Circuit: Thermal, Voltage, Speaker, DC Power @1Ohm (14.4V) N/A ;N/A Power @2Ohm (14.4V) ：160W x 4；800W x 1 Power @4Ohm (14.4V)：100W x 4；500W x 1 Power (Bridged) @4Ohm (14.4V) ：320W x 2；N/A Power (Bridged) @2Ohm (14.4V) ：N/A Operating Voltage ：9V-16V KICKER KEY 200.4 PLUG & PLAY 4 CHANNEL DSP AMP AND PLUG & PLAY VEHICLE SPECIFIC HARNESS. . KIT 11 KICKER KEY 200.4 50 WATTS X 4 FOUR CHANNEL PLUG & PLAY AMP AND VEHICLE SPECIFIC HARNESS $475 THESE HARNESS WILL REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS INCLUDED . KIT 11-1 KICKER KEY 180/200.4 HARNESS ONLY $210 THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED . KIT 11-4 KICKER KEY HARNESS 180/200.4 ONLY WITH 17 FT HIGH LEVEL INPUT CABLE WITH LOAD RESISTOR FOR SUB AMP POWERED SUB INSTALL $260 THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED . KIT 12 KICKER KEY 200.4 AMP WITH PLUGNPLAYKITS PNPKITSPRO PREMIUM ACTIVE 2 CHANNEL LOC WITH 17 FT HARNESS WITH BUILT IN LOAD RESISTORS & BASS BOOST AND COMPENSATION TECHNOLOGY . BASS X RESTORES FORD BASS ROLL OFF, GROUND ISOLATION & CLIP LIGHT & BASS KNOB WITH VOLT METER $ 650 • 2 channels of speaker level inputs (up to 40V input handling) • 2 channels of RCA level outputs • 2 channels of BASS outputs • Bass boost and compensation technology • Clip indicator • Up to 9.5V of output • 12V trigger output • Level matching controls • Turn-on mode selection (Remote, DC, Audio) • On-board load resistors selection (20Ω, 60Ω, 20kΩ) • Ground isolation selection (GND, ISO or 200Ω) • Remote level controller with voltage display THESE HARNESS WILL REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS INCLUDED . KICKER HIDEAWAY POWERED SUB IN 10 & 12 INCH KIT 14 KICKER KEY 200.4 & 51HS12 HIDEAWAY 12 INCH SUB WITH BUILT IN 230 WATT RMS AMP $975 KIT 15 KICKER 51HS12 HIDEAWAY WITH HARNESS 230 WATTS RMS $525 KIT 16 KICKER KEY 200.4 & 46HS10 HIDEAWAY 10 INCH SUB WITH BUILT IN 180 WATT RMS AMP $850 THESE HARNESS WILL NOW REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED . KIT 18 46HS10 HIDEAWAY 10 INCH SUB WITH BUILT IN 180 WATT RMS AMP & PLUG & PLAY HARNESS $450 KIT 19 KICKER KEY 200.4 4 CH AMP & KICKER KEY 500.1 MONO BLOCK SUB AMP WITH LOAD RESISTORS ADDED TO HARNESS $850 THESE HARNESS WILL REQUIRE A POWER FROM THE BATTERY TO BE CONNECTED AND GROUNDED THAT IS NOW INCLUDED . PLUGNPLAYKITS 8 GAUGE 100% COPPER WIRING KIT AND BASS KNOB FOR 500.1 SOLD SEPARATELY UNDER POPULAR ACCESSORIES TAB UNDER DROP DOWN MENU . KIT 20 KICKER KEY 500.1 AMP WITH HARNESS & BASS KNOB. $420 KIT 21 KICKER CXA8001T 800 WATT MONO BLOCK AMP & HARNESS $360 MUSWAY PRODUCTS ARE A HIGH END CLASS D SOUND QUALITY STAND ALONE DSP SPEAKERS & AMPS WITH AND WITHOUT DSP UP TO 12 CHANNRLS AND WITH PURE POWER ,SMALL SIZE ,HIGH BUILD QUALITY AT A GREAT PRICE POINT . KIT 22 MUSWAY FOUR100 4 CHANNEL 120 WATTS X 4 RMS AMP WITH PLUG & PLAY HARNESS $720 Product Specifications: OUTPUT POWER RMS @ 13.8v: 4 x 120w @ 4 Ohms 4 x 200w @ 2 Ohms 2 x 400w @ 4 Ohms bridged OUTPUT POWER RMS @ 14.4v: 4 x 131w @ 4 Ohms 4 x 218w @ 2 Ohms 2 x 435w @ 4 Ohms bridged Frequency Range -3dB: 4-39000 Hz Damping Factor: 300 S/N ratio: > 107 dB THD+N: < 0.02% Input Sensitivity 5-0.2V Channel 1/2 Crossover Modes: Full - HP-Copy High Pass Filter: 50 - 5000 Hz Channel 3/4 Crossover Modes: Full - HP - LP/BP High Pass Filter: 10 - 500 Hz Low Pass Filter: 50 - 5000 Hz Bass Boost: 0 - 12 dB @ 45 Hz Start-stop capability: 8.5V High Level Input with EPS : Yes Auto Turn On: Via DC or Signal Fuse Rating: 1 x 70A (external) Dimensions: 220 x 45 x 150 mm KIT 23 MUSWAY M4+ 4-Channel Full Range Class D Amplifier with 8-Channel Digital Sound Processor WITH PLUG & PLAY HARNESS $940 M4+ Product Overview Start-Stop ready EPS (Intelligent High-Level Input-Error Protection System) Brushed aluminum heat sink and end panels Auto Turn On via DC Offset or Signal Sensing Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards Clipping LED’s With the easy-to-use MUSWAY PC software, the M4+ can be configured perfectly and in real time via PC or the new Musway app for your smartphone or tablet. With the 3 optional USB Bluetooth dongles you can stream audio, stream aptX HD Hi Res audio, and can have app control for DSP Tuning from your smartphone or tablet. Also available is the optional DRC1 digital remote control with OLED display that puts the control of your audio system at your fingertips. Product Specifications: OUTPUT POWER (RMS) at 13.8 VDC, 1% THD: 4CH at 4 Ohms:100 W x 4 4CH at 2 Ohms:135 W x 4 2CH - (Bridge 1/2; 3/4) at 4 Ohms: 270 W x 2 Distortion - THD (1 kHz at 4 Ohms, 90% Power) :0.1% Bandwidth (-3 dB, 2 V RMS, 4Ohms): 10Hz-22KHz S/N ratio at A weighted, 1 V, Max. Power: 90dB A Damping factor at 1 kHz, 2 V RMS, 4 Ohms: >70 Input sensitivity: 10V-30V RMS(High-level) 2V-6V RMS(Low-level) Input impedance: 13 0(High-level) 47K0(Low-level) LOAD IMPEDANCE (MIN): 4CH: 2 Ohms 2CH - Bridge (1-2) (3-4) :4 Ohms Dimensions (inches) : 5.9 (L) x 8.66 (W) x 1.73 (H) Net Weight :1.6KG KIT 24 MUSWAY FIVE100 5-Channel Full Range Class D Amplifier & Harness $920 FIVE.100+ Product Overview Start-Stop ready EPS (Intelligent High Level Input Error Protection System) Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must for full range Class D Amplifiers. Passes the difficult EMI European standards. High- and Low-Level Inputs RCA (Low Level) output. Brushed aluminum heat sink and end panels Auto Turn On via DC Offset or Signal Sensing Remote level controller is included in the box Product Specifications: OUTPUT POWER RMS @ 14.4v: (CH1 - CH4) 4 x 125w @ 4 Ohms (CH1 - CH4) 4 x 225w @ 2 Ohms (CH1 - CH4) 2 x 450w @ 4 Ohms bridged (CH5) 1 x 250w @ 4 Ohms (CH5) 1 x 425w @ 2 Ohms (CH5) 1 x 650w @ 1 Ohms Frequency Range -3dB: 4-39000 Hz Damping Factor: 300 S/N ratio: > 107 dB THD+N: < 0.02% Input Sensitivity Low-Level: 0,3 - 7,8V High-Level: 0,7 - 15,6V Channel 1/2 Crossover Modes: Full - HP-Copy High Pass Filter: 50 - 5000 Hz Channel 3/4 Crossover Modes: Full - HP - LP/BP High Pass Filter: 10 - 500 Hz Low Pass Filter: 50 - 5000 Hz Channel 5 Subsonic Filter: 10 - 40 Hz Low Pass Filter: 40 - 150 Hz Bass Boost: 0 - 18 dB @ 45Hz Phase Shift: 0 - 180 Start-stop capability: 8.5V High Level Input with EPS : Yes Auto Turn On: Via DC or Signal Fuse Rating: 1 x 125A (external) Dimensions: 295 x 45 x 150 mm KIT 25 MUSWAY M5 5-Channel Full Range Class D Amplifier with 9-Channel Digital Sound Processor & Harness $976 M5 Product Overview Start-Stop ready EPS (Intelligent High-Level Input-Error Protection System) Brushed aluminum heat sink and end panels Auto Turn On via DC Offset or Signal Sensing Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards Output Clipping LED With the easy-to-use MUSWAY PC software, the M6 can be configured perfectly and in real time via PC or the new Musway app for your smartphone or tablet. With the 3 optional USB Bluetooth dongles you can stream audio, stream aptX HD Hi Res audio, and can have app control for DSP Tuning from your smartphone or tablet. Also available is the optional DRC1 digital remote control with OLED display that puts the control of your audio system at your fingertips. Product Specifications: OUTPUT POWER (RMS) @ 13.8 VDC, 1% THD (CH1 - CH4) 4 x 45 Watts RMS at 4 Ohms (CH5 SUB) 1 x 180 Watts RMS at 4 Ohms (CH1 - CH4) 4 x 50 Watts RMS at 3 Ohms (CH5 SUB) 1 x 300 Watts RMS at 2 Ohms High Level Input 6 - 18V RMS Low Level Input* (AUX) 2 - 6V RMS KIT 26 MUSWAY SIX100 6 CHANNEL FULL RANGE CLASS D AMP WITH PLUG & PLAY HARNESS $900 SIX.100 Product Overview Start-Stop ready EPS (Intelligent High Level Input Error Protection System) Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards. High- and Low-Level Inputs Brushed aluminum heat sink and end panels Auto Turn On via DC Offset or Signal Sensing Remote level controller is included in the box Product Specifications: OUTPUT POWER RMS @ 13.8v/14.4v: 6 x 110w/120w @ 4 Ohms 6 x 180w/196w @ 2 Ohms 3 x 360w/392w @ 4 Ohms bridged Highpass Filter 50 - 5000 Hz (CH1/2) Highpass Filter 10 - 500 Hz (CH3/4 & CH5/6) Lowpass Filter 50 - 5000 Hz (CH3/4 & CH5/6) Bandpass Function (CH3/4 & CH5/6) Bass Boost 0 - 12 dB (CH5/6) Input Mode Switch CH2/CH4/CH6 Damping Factor: >150 Signal-to-Noise Ratio: >107dB High Level Inputs with EPS THD: <0.02% Auto Turn On Function Bass Remote Controller Dimensions: 11.42 x 1.77 x 5.91 inch KIT 27 MUSWAY M6 6 CHANNEL AMP WITH 8 CHANNEL OF DSP AND PLUG & PLAY HARNESS . 1050 M6 Product Overview Start-Stop ready EPS (Intelligent High-Level Input-Error Protection System) Brushed aluminum heat sink and end panels Auto Turn On via DC Offset or Signal Sensing Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards Output Clipping LED With the easy-to-use MUSWAY PC software, the M6 can be configured perfectly and in real time via PC or the new Musway app for your smartphone or tablet. With the 3 optional USB Bluetooth dongles you can stream audio, stream aptX HD Hi Res audio, and can have app control for DSP Tuning from your smartphone or tablet. Also available is the optional DRC1 digital remote control with OLED display that puts the control of your audio system at your fingertips. Product Specifications: OUTPUT POWER (RMS) @ 13.8 VDC, 1% THD 6 x 70 Watts RMS at 4 Ohms 6 x 105 Watts RMS at 2 Ohms 3 x 210 Watts RMS at 4 Ohms bridged 6 x High Level Input 4,8 – 20 V RMS 6 x RCA Low Level Input* (RCA) 2 – 6 V RMS 1 x AUX Input/Stereo (RCA) 2 – 6 V RMS 1 x Optical Input/Stereo (PCM, 96 kHz / 24 bit) 6 x Loudspeaker Output amplified 2 x Pre-Amplifier Output (RCA) 4 V RMS (configurable via DSP) Dimensions: 150 x 44 x 220 mm KIT 28 MUSWAY M6PRO 6-Channel Full Range Class D Amplifier with 10-Channel Digital Sound Processor $1300 M6Pro Product Overview Start-Stop ready EPS (Intelligent High-Level Input-Error Protection System) Brushed aluminum heat sink and end panels Auto Turn On via DC Offset or Signal Sensing Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards Output Clipping LED With the easy-to-use MUSWAY PC software, the M6 can be configured perfectly and in real time via PC or the new Musway app for your smartphone or tablet. With the 3 optional USB Bluetooth dongles you can stream audio, stream aptX HD Hi Res audio, and can have app control for DSP Tuning from your smartphone or tablet. Also available is the optional DRC1 digital remote control with OLED display that puts the control of your audio system at your fingertips. Product Specifications: OUTPUT POWER (RMS) @ 13.8 VDC, 1% THD 6 x 235 Watts RMS at 2 Ohms (DHR*) 6 x 120 Watts RMS at 4 Ohms 6 x 200 Watts RMS at 2 Ohms Bridged: 3 x 400 Watts RMS at 4 Ohms High Level Input 7 - 29V RMS Low Level Input* (AUX) 1 - 8V RMS KIT 29 MUSWAY 8 CHANNEL FULL RANGE CLASS D AMPLIFIER WITH PLUG & PLAY HARNESS $1200 EIGHT.100 Product Overview Start-Stop ready EPS (Intelligent Hi-Level Input Error Protection System) Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses EMI (RF) interference which is a must with full range Class D amplifiers. Passes the difficult European EMI standards. High- and Low-Level Inputs Brushed aluminum heat sink and end panels Auto Turn On via DC Offset or Signal Sensing Remote level controller is included in the box Product Specifications: OUTPUT POWER RMS @ 13.8v: 8 x 100w @ 4 Ohms 8 x 180w @ 2 Ohms 4 x 360w @ 4 Ohms bridged OUTPUT POWER RMS @ 14.4v: 8 x 110w @ 4 Ohms 8 x 195w @ 2 Ohms 4 x 390w @ 4 Ohms bridged Frequency Range –3dB: 4 - 38000 Hz Highpass Filter 50 - 5000 Hz (CH1/2 & CH5/6) Highpass Filter 10 - 500 Hz (CH3/4 & CH7/8) Lowpass Filter 50 - 5000 Hz (CH3/4 & CH7/8) Bandpass Function (CH3/4 & CH7/8) Input Mode CH2/CH4/CH6/CH8 RCA Inputs High Level Inputs with EPS Auto Turn On Function Bass Remote Controller Dimensions: 11.81 x 1.77 x 5.91 inches KIT 30 MUSWAY ONE.600 Mono Class D Amplifier 650 WATTS RMS $525 ONE.600 Product Overview Start-Stop ready EPS (Intelligent High-Level Input-Error Protection System) Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses (EMF) interference which is a must for Class D amplifiers. High- and Low-Level Inputs RCA (Low level) Output Brushed aluminum heat sink and end panels Auto Turn On via DC Offset or Signal Sensing Remote Bass Level Controller is included in the box Product Specifications: OUTPUT POWER RMS @ 13.8v: 1 x 250 Watts RMS @ 4 Ohms 1 x 400 Watts RMS @ 2 Ohms 1 x 650 Watts RMS @ 1 Ohm OUTPUT POWER RMS @ 14.4v: 1 x 272 Watts RMS @ 4 Ohms 1 x 435 Watts RMS @ 2 Ohms 1 x 707 Watts RMS @ 1 Ohm Damping Factor: >750dB Signal-to-Noise Ratio: <0.05dB Subsonic Filter 10 - 40 Hz Lowpass Filter 40 - 150 Hz Bass Boost 0 - 18dB @45Hz Phase Shift 0 - 180° RCA Inputs, RCA Outputs High-Level Inputs with EPSAuto Turn On Function Filter Bypass Function (Pure Amplification) Quick Connect Speaker Output Bass Remote Controller Dimensions: 7.87 x 5.91 x 1.77 inch KIT 31 MUSWAY ONE.1000 Mono Class D Amplifier 1050 RMS $650 ONE.1000 Product Overview Start-Stop ready EPS (Intelligent High-Level Input-Error Protection System) Utilizes 4-fold laminated circuit boards that allows for small size and effectively suppresses (EMF) interference which is a must for Class D amplifiers. High- and Low-Level Inputs RCA (Low Level) Output Brushed aluminum heat sink and end panels Auto Turn On via DC Offset or Signal Sensing Remote Bass Level Controller is included in the box Product Specifications: OUTPUT POWER RMS @ 13.8v: 1 x 400w @ 4 Ohms 1 x 650w @ 2 Ohms 1 x 1050w @ 1 Ohm OUTPUT POWER RMS @ 14.4v: 1 x 435w @ 4 Ohms 1 x 707w @ 2 Ohms 1 x 1143w @ 1 Ohm Damping Factor: >320 Signal-to-Noise Ratio: 105dB THD <0.05% Subsonic Filter 10 - 40 Hz Lowpass Filter 40 - 150 Hz Bass Boost 0 - 18 dB Phase Shift 0 - 180° RCA Inputs, RCA Outputs High-Level Inputs with EPS Auto Turn On Function Filter Bypass Function (Pure Amplification) Quick Connect Speaker Output Bass Remote Controller Dimensions: 9.45 x 1.77 x 5.91 inch KIT 32 MUSWAY ONE.2000 Mono Class D Amplifier & Harness 2040 RMS $1070 ONE.2000 Product Overview Extreme Power Handling: Easily drives an array of woofers wired to a 1-ohm load, showcasing its capability to handle diverse audio setups with exceptional efficiency and power. Advanced EMC Interference Suppression: The 4-fold laminated board effectively suppresses Electromagnetic interference (EMF), ensuring a clean audio signal and superior performance due to its favorable topology. EPS Technology for Seamless Integration: Featuring EPS technology, the ONE.2000 ensures that when connected to an OEM factory radio, no functions are impaired, and no error messages are written into the vehicle memory. This innovative technology guarantees a seamless integration experience. This amplifier offers versatile power configurations, adapting to various speaker setups and ensuring optimal performance. Convenient Control with Bass Remote: Bass Remote Controller Take control of your bass preferences on-the-fly with the included Bass Remote Controller, enhancing your overall audio experience. Product Specifications: OUTPUT POWER RMS @ 13.8v: 1 x 850w @ 4Ohms 1 x 1400w @ 2Ohms 1 x 1850w @ 1Ohm OUTPUT POWER RMS @ 14.4v: 1 x 925w @ 4Ohms 1 x 1500w @ 2Ohms 1 x 2040w @ 1Ohm Subsonic Filter 10 - 40 Hz Lowpass Filter 40 - 150 Hz Bass Boost 0 - 18dB @45Hz Damping Factor >235 Signal-to-Noise Ratio: 104 dB THD is <0.05% Phase Shift 0 - 180° RCA Inputs, RCA Outputs High-Level Inputs with EPS Auto Turn On Function Filter Bypass Function (Pure Amplification) Quick Connect Speaker Output Bass Remote Controller Dimensions: 12.60 x 6.30 x 1.97 inch KIT 33 MUSWAY DSP68 8-Channel DSP with PC/APP Control & Harness $700 \ CONVERTERS & HARNESS FOR ADDING FULL SYSTEM KIT 34 4 CHANNEL/ HI LEVEL INPUT / LOOP BACK HARNESS $200 KIT 36 FOUR CHANNEL ACTIVE LOC , LC5IPRO/DSP 17 FT PLUG & PLAY HARNESS $200 KIT 37 NEW LC5IPRO WITH 17 FT PLUG & PLAY HARNESS . FRONT REAR AND SUB RCA OUTPUT WITH ACCUBASS TO RESTORE BASS THAT THE FACTORY RADIO TAKES OUT & BUILT IN LOAD RESISTORS AND BASS KNOB $410