Airbrush Kit with Air Compressor, 25/35/50 PSI, 0.2/0.3/0.5mm Nozzle

Brand: SUNMORNColor: Black/ChromeFeatures: Three Preset Pressures for Real Control – Switch between 25, 35 and 50 PSI with the touch panel, then confirm each level before you start spraying. Low suits soft color blending on cakes, mid handles general craft coverage, high pushes thicker thinned paint through. If a level does not respond, unplug for 30 seconds and reselect before use. Rinse Right After Each Session – Unscrew the nozzle, pull the needle, and flush warm water through the cup and body until the spray runs clear, then wipe the needle dry. Doing this after every use keeps paint from setting inside the 0.2mm tip, which is where most clogging starts. A deep clean with the included brushes once a week keeps airflow steady. Built for Cake, Model and Craft Work – The 0.3mm setup handles everyday coverage on fondant, cookies and model kits, while the 0.2mm tip reaches fine lines on miniatures and nail art. This unit is not cosmetic grade and is not intended for direct application to facial skin; for food decorating, use food-safe colorants only. Thin Your Paint First, Then Spray – Acrylics and water-based colors spray best thinned roughly 1 part paint to 2–3 parts water or medium, until it drips off the mixing stick like milk; unthinned paint is the most common cause of a sputtering tip. For longer sessions, run the compact compressor in intervals and let it cool between passes rather than running it nonstop. What's in the Box – One airbrush with gravity feed cup, one compact air compressor, coiled air hose, 0.2/0.3/0.5mm nozzle and needle sets, spare cup, filter, cleaning brushes, dropper, and storage bracket. Check that the nozzle size marked on the tip matches the needle before installing, and confirm your cup volume and working time against the spec sheet before a long project. model number: SUNMORN18010101Part Number: Ab-kit-001Package Dimensions: 7.1 x 6.8 x 2.5 inches