Stanley Stud Finder with Laser Intellisensor Pro STHT77260

The Stanley Stud Finder with Laser Intellisensor Pro (STHT77260) combines a wood and metal stud sensor with a pivoting laser line, so you can find the frame behind a wall and mark a straight line from the same tool. It suits hanging shelves, TVs, cabinets and artwork, and general layout jobs around the home or worksite.About the product This is a battery-powered electronic stud finder with a built-in line laser. A backlit LCD screen shows the sensor readings, so it stays easy to read in dim rooms. It also gives continuous live wire detection, which warns you about hidden wiring before you drill or fix. The laser head pivots through 180 degrees and projects a line up to about 6 m (around 20 ft) onto the work surface. Level and plumb vials help you set the tool true before you draw your line.Where to use it Indoors: locating studs and joists behind walls and ceilings, and checking for live wires before drilling or fixing. Also for marking level or plumb lines for shelving, picture rails, cabinetry and wall-mounted fixtures. Worksite: laying out horizontal and vertical lines across a wall from a single position.How to use it Backlit LCD display for clear readings, even in low light Detects wood and metal studs through common wall surface thicknesses Continuous live wire detection to flag hidden wiring 180 degree pivoting laser line with level and plumb vials Two self-contained hang pins let you mount the unit on the work surface, vertically or horizontally Ergonomic body with soft grips for comfortable control Scan the wall slowly with the tool held flat against the surface and follow the on-screen and audible indications to find the stud. Mark the position, then use the pivoting laser and vials to project a level or plumb line from your mark. Check the manufacturer's instructions for calibration and scanning technique.Important notes Detection depth depends on the wall material and its thickness, so treat readings as a guide. Always confirm the location of hidden wiring and services by other means before cutting or drilling, as the live wire detection is a warning aid only. Test the tool on a section of wall you know before relying on it for a critical job. Batteries are not confirmed as included, so check the pack before you start.Specifications Brand Stanley Product Stud Finder with Laser Intellisensor Pro Model number STHT77260 Pack 1 x stud finder with laser Colour Yellow and black Material Plastic Power source Battery Display Backlit LCD Laser head 180 degree pivoting red laser line, projects up to about 6 m (20 ft) Detection Wood studs, metal studs and live wires Product size (approx.) 305 x 150 x 50 mm Warranty 1 year limited (per manufacturer) Care and storage Do not shine the laser at eyes or at other people. Keep the tool clean and dry, wipe the sensor face and laser window with a soft cloth, and store it away from moisture and extreme heat. Remove the batteries if you will not use it for a long time, and keep it out of reach of children. Refer to the manufacturer's instructions for full details.