Hommix hydRO Pro Complete Replacement Filter Pack - PCB, RO Membrane & Post Carbon

Complete three-filter maintenance pack Refresh every filtration stage in your Hommix hydRO Pro The Hommix hydRO Pro Complete Replacement Filter Pack contains the pre-filter, 800 GPD reverse-osmosis membrane and post-carbon filter required for a full system refresh. Each cartridge is made for the hydRO Pro quick-change system, allowing straightforward replacement without specialist tools. Everything needed for a full refresh Three genuine replacement cartridges in one pack This pack replaces all three cartridges inside the Hommix hydRO Pro. It covers the sediment and carbon pre-treatment stage, the main reverse-osmosis membrane and the final taste-polishing stage. 1 × PPCB sediment and carbon pre-filter 1 × 800 GPD reverse-osmosis membrane 1 × CB post-carbon filter Genuine Hommix hydRO Pro replacement pack Quick-change, tool-free cartridge design 3 Complete pack All three system cartridges are included. 800 800 GPD membrane The main RO purification stage. ✓ Correct fit Made for the Hommix hydRO Pro system. ↻ Quick change Replace the cartridges without specialist tools. Three cartridges, four filtration stages What each replacement filter does 01 PPCB pre-filter Combines sediment and activated-carbon treatment to help reduce rust, sand, suspended particles, chlorine and other impurities before the water reaches the RO membrane. 02 800 GPD RO membrane The principal purification stage. Hommix states that it reduces up to 99% of dissolved contaminants, including heavy metals, fluoride and microplastics. 03 Post-carbon filter Provides the final polishing stage, helping improve the taste, freshness and clarity of the purified water before it reaches the tap. Choose the correct maintenance pack This complete set is not normally required every year The PPCB and post-carbon filters are normally changed annually. The RO membrane typically lasts longer, so this complete three-filter pack is generally used when the membrane is also due for replacement. Every 12 months Routine annual filters PPCB sediment and carbon pre-filter plus the CB post-carbon filter. Every 24–36 months Complete system refresh PPCB pre-filter, 800 GPD RO membrane and CB post-carbon filter. Replacement timing is a guide: Actual filter life varies with water quality, water use and the system's filter-life indicators. Replace a cartridge sooner if the hydRO Pro signals that it is due. Simple ongoing maintenance Quick-change cartridges designed for the hydRO Pro The hydRO Pro allows its filters to be accessed and released without moving the entire system. Follow the system manual and on-screen filter indicators when changing the cartridges. Check which filter indicator is showing as due Isolate the system as directed in the user manual Release and replace each required cartridge Reset the relevant filter-life indicator Flush the new filters before drinking the water ✓ Compatibility confirmed Made specifically for the Hommix hydRO Pro 800 GPD system This pack is intended for the Hommix hydRO Pro tankless reverse-osmosis system. It should not be ordered for another Hommix model solely because the cartridges look similar. View the hydRO Pro → Pack information Hommix hydRO Pro complete filter pack Manufacturer Hommix Compatible system Hommix hydRO Pro 800 GPD tankless RO system Pack contents 1 × PPCB pre-filter, 1 × 800 GPD RO membrane and 1 × CB post-carbon filter PPCB function Sediment and activated-carbon pre-filtration Membrane function Main reverse-osmosis purification stage Post-carbon function Final taste and odour polishing Typical full-pack interval Approximately every 24–36 months, depending on use and water quality Replacement method Quick-change cartridges; no specialist tools required Need the system rather than the filters? View the complete Hommix hydRO Pro RO system Compare the full 800 GPD tankless system, its filtration stages, installation requirements and optional alkaline remineralisation filter. View the hydRO Pro system More replacement cartridges Browse the Regal Flow filter-replacement range Find replacement filters for reverse-osmosis systems, under-sink filters, countertop dispensers and whole-house filtration systems. Shop replacement filters Helpful answers Frequently asked questions Which filters are included?The pack contains one PPCB sediment and carbon pre-filter, one 800 GPD reverse-osmosis membrane and one CB post-carbon filter. Is this the annual replacement pack?No. This is the complete three-filter pack and includes the longer-life RO membrane. The PPCB and post-carbon filters are normally replaced annually, while the complete pack is typically used every 24–36 months when the membrane is also due. How do I know when the filters need changing?The hydRO Pro has individual filter-life indicators and provides a warning as a cartridge approaches the end of its monitored life. Actual lifespan varies with water use and incoming water quality. Will this fit another Hommix reverse-osmosis system?This pack is specifically listed for the Hommix hydRO Pro 800 GPD system. Contact Regal Flow with your exact model before ordering if your system has a different name or capacity. Are specialist tools required?No specialist tools are required for the quick-change cartridges. Always follow the isolation, replacement, reset and flushing instructions in the hydRO Pro user manual. Does this pack include an alkaline remineralisation filter?No. The optional Hommix alkaline mineralising filter is a separate external cartridge and is not included in this three-filter pack. Friendly expert support Not sure whether you need the annual or complete filter pack? Send us a photograph of your system and its filter-life display. We will help confirm the correct replacements before you order. ☎Telephone ✉Email ●WhatsApp →Contact form