TMRC SeaVee 322Z Tower Upgrade — STL Add-On

DISCLAIMER This is a digital STL file. No physical product will be shipped. All sales are final. Due to the nature of digital downloads, no refunds or exchanges are offered. Files are for personal use only. Redistribution, resale, or sharing of the files or printed parts is prohibited. This is an original Tremendous Marine RC design and is not affiliated with, endorsed by, or associated with any real-world boat manufacturer. All brand names are referenced strictly for descriptive and inspirational purposes only. TMRC SeaVee 322Z Tower Upgrade — STL Add-On Second-Station Tower for the TMRC SeaVee 322Z ADD-ON PACK. This is an upgrade for the TMRC SeaVee 322Z STL Pack and does not include the hull, deck or console. You need the base SeaVee 322Z pack to use these files. Take the 322Z from a clean center console to a full offshore tower boat. The Tower Upgrade adds a complete second-station rollbar tower designed to the same print-first philosophy as the rest of the TMRC line — every tube, gusset and mounting point is drawn to print clean, assemble square, and hold up on the water. Design Intent Full-height rollbar tower with integrated ladder geometry Upper helm station with console and seat cushion Tower top with hardtop profile Alternate fixed radar-tower version for a lower, radar-dome look Mounts to the existing SeaVee 322Z deck and hardtop footprint Proportioned for scale realism without upsetting the boat's balance What's Included Tower Rollbar STL (main tower frame and legs) Tower Console STL (upper helm station) Tower Cushion STL (upper seat) Tower Top STL Fixed Radar Tower Version STL (alternate one-piece tower) TMRC Personal Use License (PDF) Recommended Print Settings Material: PETG / ABS Infill: 100% (towers and rollbars print solid for strength) Layer Height: 0.2 mm Supports: Yes — required for the tower frame Print tube sections upright in the provided orientation Test-fit legs to the hardtop before final glue-up Filament Printed in SUNLU PETG. Get it here (affiliate link): https://store.sunlu.com?sca_ref=11554757.OetPZf1JlD&utm_source=sunluaffiliate&utm_medium=sunluaffiliate&utm_campaign=sunluaffiliate Printer Size Every part fits a standard build plate except the Tower Top, which is the only large piece. On a smaller machine, split the top down the middle in your slicer, print the two halves, and glue them — the seam sits on the centerline and disappears with a light sand. Requires TMRC SeaVee 322Z STL Pack (sold separately) Digital Download Only No hardware, hull, deck, motors, electronics or fasteners included. Files are delivered as a ZIP download immediately after purchase — extract on a computer before printing. TMRC Handcrafted performance. Built by enthusiasts, for enthusiasts. Stay Tremendous.