Waterproof Dust Mite V-Shape Pillow Protector | AU

Dust mite pillow protector, V-Shape — waterproof, zippered A waterproof encasement that seals your V-shape pillow inside a microporous TPU barrier, keeping dust mite allergens trapped inside and blocking spills. The TPU membrane creates a barrier against the fine particles that carry those allergens (typically 10–40 microns), while remaining waterproof. Your normal pillowcase goes over the top. Free shippingover $150 12-monthwarranty 3rd partypore-size tested What makes a waterproof V-Shape pillow protector effective A microporous TPU membrane with pores measured at around 0.16 microns — far smaller than the 10–40 micron particles that carry dust mite allergens — laminated behind a soft jersey outer. Pore-size figures come from a third-party test report, available on request. Dust mite allergen barrier — pores well below allergen-particle size, so dust mite waste stays sealed inside the pillow and out of the air you breathe. Waterproof TPU barrier — blocks spills and drool. Breathable, not sweaty — the membrane is microporous, letting water vapour through so the protector still breathes. Full-length zipper — a zip running along one end seals the pillow inside. Soft, silent, stretchy — the jersey outer feels like fabric, not plastic (no crinkle) and stretches to fit varied pillow loft. The pore-size detail (third-party tested) Dust mite allergens are carried by fecal pellets and body fragments that typically measure 10 to 40 microns. According to a third-party test report, this fabric’s TPU membrane has pores measured at approximately 0.16 microns at maximum distribution (third-party capillary flow porometry, Galwick fluid) — well below that range. The full-length zipper encloses the pillow on all sides. Pore-size figures are from a third-party laboratory test report provided by our manufacturer; a copy is available on request. Materials & specifications Materials and testing specifications Fabric outer 90gsm polyester knitted jersey Lining 0.2mm microporous TPU (thermoplastic polyurethane) waterproof membrane Pore size Approximately 0.16 microns at maximum distribution (capillary flow porometry, Galwick fluid). From a third-party test report. Shape V-shape (boomerang) Closure Full-length zipper Waterproof Yes — TPU membrane blocks liquid spills Warranty 12-month voluntary warranty against manufacturing defects, in addition to your Australian Consumer Law rights (excludes misuse, improper washing, or damage). See our Refund Policy for full terms. Who this waterproof V-Shape pillow protector is for Best for V-shape (boomerang) pillows used for back support, pregnancy, or recovery. Use one encasement per pillow. Commonly chosen by Anyone building a dust mite barrier across mattress, pillow, and quilt People using a V-shape pillow for back support, pregnancy, or recovery Parents wanting a waterproof layer on a V-shape pillow for drool or sick days Probably not the right fit if You prefer 100% natural fibres — see our cotton V-Shape pillow protector (more breathable; not waterproof) Your V-shape pillow is much larger or smaller than standard — measure both arms and the angle before ordering, or contact us Your pillow is a different shape — see our Standard/Queen, King or Euro waterproof version. Care A warm or gentle cycle is best — do not exceed 60°C. Skip bleach and fabric softeners to protect the TPU membrane. Full care instructions Wash: warm or gentle cycle. Do not exceed 60°C — high heat can damage the TPU membrane over time. Dry: tumble dry low/medium or air dry. Avoid very hot dryers. Frequency: every 3–6 months when a pillowcase sits over the top. Wash sooner after a spill or accident. Avoid: bleach, fabric softeners, dry cleaning, ironing, and any oils or strong detergents. Lifespan: over 4–5 years, body oils can gradually break down the TPU. A pillowcase on top significantly extends its life. Waterproof V-Shape pillow protector FAQs Will it fit my V-shape pillow? V-shape pillows vary more than standard sizes. The knitted jersey has stretch to accommodate variation, but measure both arms and the angle before ordering. If your pillow is significantly outside standard dimensions, contact us first. What’s the difference between this and the cotton V-Shape pillow protector? Both can be used as a barrier against dust mite particles. The cotton version is 100% natural cotton and more breathable, but not waterproof. This version has a TPU waterproof lining that also blocks liquid spills and has a stretchy fit. Does it feel like plastic? No. The TPU membrane is laminated behind a soft polyester knitted jersey, so the surface that touches you is fabric. There’s no plastic crinkle. Will it make me hot? Less than a fully laminated PVC protector, but slightly more than a 100% cotton encasement. The TPU membrane is microporous — it allows water vapour through, so it breathes — but it’s not as breathable as natural fibre.