Epoch Batteries 48V 30Ah (1.54kWh) GC2 - Golf Cart LiFePO4 Lithium Battery

LiFePO4 Chemistry 30Ah Capacity 60A Max Continuous (100A 10S Pulse) (200A 3S Pulse) IP67 Rated, Dust and WATERPROOF CAN Bus Communication Built-in Smart Battery Management System (BMS) Over charge and over discharge protection Over current and short circuit protection High & low temperature disconnects 4000+ Cycle life & Maintenance-free 11 Year Manufacturer Warranty Configuration Cell Configuration: 16S Chemistry: LiFePO4 Current Ah Capacity: 30Ah Max Charge Current Amps: 30A Max Discharge Peak Current Amps: 100A (10 Seconds) - 200A (3 Seconds) Series | Parallel: Max (10) in Parallel = 300 Amp Hours Voltage Voltage: 51.2V Nominal Max Charge Voltage: 57.6V Operating Voltage Range: 40.0 - 57.6V Temperature Charge Temp Range: 0°C (32°F) / 55°C (131°F) Discharge Temp Range: -20°C (-4°F) / 55°C (131°F) Storage Temp: 0°C (32°F) / 30°C (86°F) (<6 Months) Weight: 33 (LBS) Dimensions Length: 10.25 (inches) Width: 7 (inches) Height: 11 (inches) M8 Terminals - Torque Tension Recommendation is 8-12N·M Pack Certifications: UN38.3, CE Cell Certifications: UL1642, UL2580, UN38.3 To properly charge your Epoch Batteries, you will want to verify that any charging component in your system is capable of being programmed for the following specifications. Charging components can include, but are not limited to converters, inverter chargers, solar charge controllers, DC to DC chargers, etc. Bulk/Absorption: 14.2V – 14.6V Absorption Time: Two batteries in parallel connections require 30 minutes 200Ah Float: 13.4V – 13.8V Equalization: 14.4V/ Disabled Temperature Compensation: 0/Disabled Charge Rate: 50% of the battery or battery bank capacity Battery Charge Temperature Range: 32°F (0°C) to 131°F (55°C) Battery Discharge Temperature Range: -4°F (-20°C) to 140°F (60°C) Cell Charge Temperature: 32°F (0°C) to 131°F (55°C) Cell Discharge Temperature: -4°F (-20°C) to 140°F (60°C) NOTE: Not all chargers are capable of multistage charging. If yours is not, you will want to verify it can be programmed for the Bulk/Absorption voltage and have the other items mentioned disabled if applicable. Consult your charger's manual or the manufacturer.