HL48P06 48-Module 16-Way Pre-Wired 3-Phase Distribution Board 40A 30mA RCD IP30

The HL48P06 is a prefabricated, pre-wired and tested 48-module distribution board, supplied ready to connect. It pairs a Hager Volta flush IP30 enclosure with Legrand RX³ protective devices: two 4-pole 40A 30mA Type A RCDs feeding 16 single-pole B16 circuits split across two 40A 30mA RCD banks. Built for three-phase 230/400V installations in homes, apartments and light commercial premises, it arrives with busbar, neutral and earth bars and internal wiring already done, leaving 24 spare ways for future circuits. Technical specifications Part number: HL48P06 Enclosure: Hager Volta VU48NC, flush (recessed) wall mounting Module capacity: 48 (4 rows of 12 x 18mm) Protection rating: IP30 Dimensions (approx.): 756 x 348 x 98 mm (H x W x D) Door: white hinged steel door with quarter-turn latch and technical-data label Main protection: 2 x Legrand RX³ 402075 RCCB, 4-pole, 40A, 30mA, Type A, 400V (dual-RCD split load) Outgoing protection: 16 x Legrand RX³ 419136 MCB, 1-pole, B16, 6kA, 230V Modules used: 24 of 48 (24 spare ways for future circuits) Internal wiring: 10 mm² H07V-K with insulated ferrules; Hager KDN363A 3-phase, 12-module busbar comb Distribution bars: separate neutral (blue) and protective earth (green/yellow) terminal bars Supply: three-phase, 230/400V AC, 50Hz Features and benefits Prefabricated, pre-wired and tested: no internal assembly, busbar cutting or comb wiring on site Dual-RCD split load: a fault on one bank leaves the other half of the circuits live Type A RCD trips on both AC and pulsating DC residual currents, covering circuits with electronic loads that a Type AC device would miss 30 mA sensitivity adds protection against electric shock B16 curve breakers suit general lighting and socket circuits with low inrush 24 spare module ways for adding circuits later Flush enclosure finishes level with the wall surface Branded protection throughout: Hager Volta enclosure, Legrand RX³ devices Applications New three-phase consumer units in houses and apartments Renovation and rewiring projects Light commercial and office sub-distribution Replacement of older fuse boards Built from components compliant with IEC 61008-1 (RCD) and IEC 60898-1 (MCBs); enclosure to DIN 43870, IP30 per IEC 60529. Also known as: pre-wired 3-phase consumer unit 48 module, populated distribution board 40A 30mA, Hager Volta Legrand RX3 board, flush mount fuse board 3 phase, ready wired distribution board