H&R BMW G Series Wheel Spacers (5x120, 66.5mm bore) – XM

H&R TRAK+® wheel spacers for the BMW G Series (2022+), bolt pattern 5x120 with a 66.5mm centre bore. Push the wheels out for a flush, wider stance and a more planted feel, with no rubbing when sized correctly. Precision CNC-machined from high-strength aluminium, hub-centric for vibration-free fitment. Choose independent front and rear thicknesses (10–20mm) for a square or staggered setup, pick a silver or black finish, and add Bimecc extended wheel bolts if you need them. Full fitment details for this vehicle are listed below.Specification Bolt pattern: 5x120 Centre bore: 66.5 mm TÜV-approved sizes: 10–20mm per side Finish: Silver or Black Wheel bolts: optional Bimecc extended boltsTÜV / ABE Approved SizesEvery H&R TRAK+ spacer is individually TÜV-tested and supplied with an ABE / parts certificate. For this vehicle, H&R certifies the following per-side thicknesses: 10, 12, 15, 18 and 20mm. These are the only sizes that pass H&R’s clearance and arch-coverage testing for this car, so every size offered here is an approved, road-legal fitment.Why the range is capped: the approved limit reflects how far the wheel can move outward before the tyre would contact the arch or sit proud of the bodywork (which is a legal requirement). Models that leave the factory with wider wheels and tyres have a lower certified limit because the wheel already sits close to the arch, while cars with more clearance can take larger spacers. We only list the sizes H&R has certified for your exact vehicle, so you can fit them with confidence.Vehicle CompatibilityThese H&R spacers are a direct fit for the following BMW model (all share the 5x120 66.5mm-bore hub). Always confirm your chassis code and wheel/tyre clearance before ordering. Model Years Engines / Trims XM (G09) 2022-12–on XM All-wheel Drive