Pure Tung Oil

100% PURE TUNG OIL, NOTHING ADDED TotalBoat Pure Tung Oil is a traditional penetrating wood finish made with no added solvents or driers. Unlike film-building finishes that sit on top of the surface, it soaks into the wood to enhance grain and create a low-sheen appearance. Use it to beautify and restore furniture, cabinetry, turned pieces, cutting boards, serving pieces, trim, restoration work, and suitable outdoor wood. Once fully cured, the finish is non-toxic and food-contact safe, making it a practical choice for charcuterie boards, butcher blocks, wooden utensils, wooden bowls, and other kitchen or dining pieces. ENRICH THE GRAIN & BUILD WATER RESISTANCE Pure tung oil penetrates the wood to deepen color, bring out grain patterns, and restore richness to dry or weathered surfaces. Unlike other food-safe finishes that create a surface film, this formula cures within the wood for longer-lasting beauty. The effect varies by wood species, so test on scrap wood or an inconspicuous area first if the final color is important. Apply 2-5 coats to build the level of water resistance your project needs. Multiple coats and a full cure help protect indoor and outdoor furniture, home decor, serving pieces, and other woodwork from everyday moisture exposure and wear-and-tear. Keep in mind that outdoor surfaces may need periodic maintenance as the finish wears from use and weather. EASY TO APPLY, MAINTAIN & RENEW Start with clean, dry, unfinished wood or another suitable porous surface. Apply the tung oil generously with a natural-bristle brush or clean, lint-free cloth, then allow it to penetrate for 30-45 minutes. Wipe away all excess oil so no puddles, glossy areas, or wet spots remain. Pure tung oil cures more slowly than solvent-based finishes. Allow at least 7-10 days before light use and 15-25 days for a full cure under warm, dry, well-ventilated conditions. Cooler temperatures, high humidity, or heavier applications will extend cure time. When the finish begins to look worn or dry, maintenance is simple. Clean the surface, apply a thin maintenance coat, wipe away the excess, and allow it to cure completely before use. TOTALBOAT 100% PURE TUNG OIL FEATURES Made with only tung oil, with no added solvents or driers Penetrating finish for interior and exterior wood Enhances grain and restores dry or weathered surfaces Apply 2-5 coats to build water resistance Suitable for furniture, countertops, turned pieces, cutting boards, serving pieces, restoration work, and other woodworking applications Allow each coat to penetrate for 30-45 minutes, then wipe away all excess oil Non-toxic and food-contact safe once fully cured Allow at least 7-10 days before light use and 15-25 days for full cure under warm, dry, well-ventilated conditions First coat may be thinned with mineral spirits, citrus solvent, or pine solvent Available in 1 qt. size