Genuine Starlink Gen 3 Pivot Mount

Genuine Starlink Gen 3 Pivot Mount for roof installs Use this official Starlink Standard Pivot Mount when you need a genuine roof-mounting option for a Starlink Standard (Gen 3 / V4) terminal on a suitable sloped roof. The pivoting base helps keep the mast vertical, then the Starlink app guides final dish alignment. ✅ Best suited for Permanent Starlink Standard (Gen 3 / V4) roof installations Sloped or shingled roof surfaces where a vertical mast is required Installations where a genuine Starlink accessory is preferred Customers who want local Spacetek support and Australian dispatch 🛰️ Compatibility Starlink Standard (Gen 3 / V4) Starlink Standard Kit / Standard 4 / V4 terminology where used by Starlink Starlink Standard 4X and Enterprise only where Starlink specifies this Standard Pivot Mount This is not the Gen 2 actuated Pivot Mount. If you have the older rectangular Gen 2 actuated Starlink, choose the Gen 2 Pivot Mount instead. 📦 What is included Pivot Mount Mast adapter and mast 2 × sealant tape squares 2 × sealant tape strips 2 × lag screws 20 × cable routing clips 📏 Key specs Package dimensions: 280 × 470 × 105 mm Package weight: 1.9 kg Approximate Starlink guide dimensions: 448 mm long, 140 mm wide, 235 mm high, with up to 90° pivot range 🛠️ Installation notes Use the Starlink app obstruction tool before drilling. Install over a structural beam or rafter, not unsupported roof sheeting. The arrow on the mount should point up the roof slope. Align the mast vertically, route the cable through the mast, then use the Starlink app alignment tool before locking the terminal in place. Important: roof work can be dangerous and the mount must be fixed into suitable structure. If you are not comfortable with roof installation, use a qualified installer. Genuine Starlink accessories are held in limited Spacetek stock for customers who want local availability and fast dispatch. If timing is not important, you may also choose to order direct from Starlink.