Sunmix NOVA 22 22-Division Manual Dough Divider, 1.7 to 10.5 oz Portions, Round Tray

The Sunmix NOVA 22 is a manual dough divider that presses and cuts a single dough charge of up to 14.5 lb into 22 portions of equal weight, anywhere from 1.7 to 10.5 oz each. It is built for bakeries, pizzerias and artisanal laboratories that still divide by hand and want the dividing phase to be faster and more repeatable than scaling each piece, which makes it a fit for pizza balls, dinner rolls, burger buns and small sandwich rolls. The machine works with doughs up to 70% hydration, so most pizza, bread and focaccia formulas are in range. With a top portion weight of 10.5 oz it is not the tool for full-size loaves; its range is individual pizza bases, rolls and buns. There is no motor and no electrical connection: it is operated entirely by lever, stands on the floor, and arrives packed in a wooden crate.22 Equal Portions From One PressLoad the dough on the round tray, bring the lever down to press it flat, then complete the cutting stroke and the NOVA 22 delivers 22 pieces of the same weight. The portion weight is set by how much dough you put on the tray: a lighter charge gives pieces near 1.7 oz, a full load of about 14.5 lb gives pieces near 10.5 oz. For a pizzeria portioning the evening's dough balls or a bakery turning out trays of rolls, that replaces a scale, a bench knife and a lot of re-weighing with a single cycle that comes out the same every time.Manual Lever Pressing and CuttingBecause the machine is fully manual, the operator keeps direct control over both phases. You decide how hard and how long to press before the cut, which matters when a wet 70% hydration dough wants to be handled gently and a firm bread dough wants a firmer, quicker stroke. An automatic divider applies the same pressure to everything; here, the force is yours to adjust. The payoff is accurate portions across different formulas without changing settings or tooling.Round Tray Included, Additional Trays OptionalA round tray is part of the standard supply, so the divider is ready to work on delivery. Sunmix also offers additional trays as a factory option. With two or more trays in rotation you can be loading and lightly flattening the next charge while the current one is being pressed and cut, which keeps the dividing bench moving during a prep rush.Painted Steel Frame and Floor FootprintThe structure is robust painted steel, chosen for stability under repeated lever pressure and for wear resistance over years of daily use. The body stands 60 inches tall on a footprint of 27 inches wide by 28 inches deep, and it weighs 187 lb, so it stays planted while you work the lever. Allow room for the lever: it reaches 39 inches of depth at full travel and 83 inches of height when raised. Each unit is finished in your choice of Rosso Rubino (ruby red), Nero Profondo (deep black) or Bianco Puro (pure white), chosen when you order.