DS18 ZXI-62C ZXI 6.5" 2- Way Component Speaker System with Kevlar Cone - 120 Watts RMS 4-Ohm

DS18 ZXI-62C ZXI 6.5" 2- Way Component Speaker System with Kevlar Cone | 120 Watts Rms 4-Ohm DS18's ZXI line is both highly innovative and intuitive making it a very versatile audio line that will bring you loud and clear music on demand. This component set includes a one-way 6.5" that takes 120w RMS and 240 Max watts. It has a 88 dB sensitivity rating, you don't need a lot of power to bring these very loud speakers to extremely high volumes. Also included is a 30w RMS tweeter that can either be mounted on the grill assembly, or in another location of your choosing. The included DS18 passive crossover will get your frequency just right for the best sound available. These speakers are an amazing choice for your average every day to extreme audiophile! Features Power Handling: 120 WATTS RMS / 240 WATTS max gives you plenty of headroom for loud, clean playback. Sensitivity: 88 dB sensitivity lets it play efficiently on aftermarket or factory power. Frequency Response: 40 Hz - 20 KHz for full, balanced sound across its intended range. Barium Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output. Voice Coil: 25.5 mm (1 inch) EISV voice coil on a KSV former handles heat and power for long listening sessions. Cone Material: Glass fiber cone is stiff and lightweight for accurate, low-distortion sound. Surround: Rubber surround allows controlled cone movement and long-term durability. Tweeter / Driver: SILK diaphragm delivers crisp, detailed highs. Long Excursion: Xmax of 2.7 mm lets the cone move more air for deeper bass. Rigid Basket: Steel basket keeps the moving parts aligned under high power. Recommended High-Pass: Use a 60 Hz high-pass filter to protect the speaker and get the cleanest output. Grilles Included: Grilles are included to protect the speakers and finish the install. Highly durable and extremely loud design built for the average to extreme audio systems. Glass fiber cone helps give higher sensitivity and produce overall more sound when on lower power. Component design will bring a full range of frequencies to your ears and with great sound quality. Highlights 6.5" 2-Way Component MAX Power: 240 Watts RMS Power: 120 Watts Impedance: 4 Ohm Barium Ferrite & Neodymium Magnets Pair ~ Crossover ~ 88dB Specifications General Nominal Diameter: 6.5 Inches / 165 mm Nominal Impedance: 4 ohm RMS Power Handing: 120 WATTS MAX Power Handing: 240 WATTS Sensitivity: 88 dB Frequency Response: 40 Hz - 20 KHz Recommended HI Pass: 60 Hz Speaker Type: 2-Way Woofer Voice Coil Diameter: 25.5 mm (1 inch) Voice Coil Former Material: KSV Winding Material: EISV Cone Material: Glass fiber Surround Material: Rubber Basket Material: Steel Magnet Material: Barium Ferrite Magnet Weight: 14.4 oz / 410 g Grill Included: Yes Pair: Yes Tweeter Nominal Diameter: 31.7 mm (1.25 inch) Voice Coil Diameter: 25.5 mm (1 inch) Voice Coil Former Material: ASV Winding Material: EISVM Diaphragm Material: SILK Magnet Material: Neodymium Magnet Weight: 13 g / 0.46 oz Pair: Yes Crossover Specifications & Features Passive Crossover Ways: 2 Ways Frequency Crossover point: 3.5 Khz Cut-Off Slope: 12 dB / Oct Tweeter Attenuation: (+/- 3 dB) Capacitor Type: NP Coil Type: KSV Housing Material: ABS / Acrylic Adjustments: Tw Attenuation Extra Features: Pt Tw protection Pair: Yes Thiele & Small Parameters Vas: 10.36 LTR Xmax: 2.7 mm Fs: 64 Hz Qms: 9.50 Qes: 0.85 Qts: 0.78 Measurements Product Weight: 7 lbs Product Dimensions: 16 x 10.75 x 3.5 Sold In: Pair Professional Installation Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.