35mm Color Film - Seattle Filmworks 640 (Expired - 1 Roll)
Seattle Filmworks 5294 35mm Film (limited supply) - Color Balance: Unknown - Expiration date: Unknown - 640 iso - 1 Roll - 20 exposures - Process: ECN-2* - Note: Packaging of film you receive may vary from pictured. The Seattle FilmWorks rolls offered by the Film Photography Project are expired, with the exact expiration dates unknown, but they are believed to date from the mid-1990s. As with all expired film, expect unpredictable results including color shifts, increased grain, fogging, and reduced contrast. Every roll offers a unique opportunity to experience a fascinating piece of photographic history. Possible outcomes Vintage color palette with unpredictable shifts Increased grain Lower contrast Color shifts most likely toward magenta, cyan, or yellow Reduced shadow detail Occasional fogging or base haze Also: Consider shooting at lower ISO (for example, shoot 640 at 200 ISO or lower) Your results will vary from examples pictured *NOTICE: This motion picture film CAN NOT be processed by standard commercial film labs! Vision3 film has a carbon based "Rem Jet" and can be home developed or developed by one of the recommended labs below. Please read all the information on this page before purchasing this product. Process at home using the FPP Home Color Kit or send your film to: Blue Moon Camera & Machine Portland, Oregon USA https://www.bluemooncamera.com or OLD SCHOOL PHOTO LAB New Hampshire USA https://oldschoolphotolab.com/ or Botique Photo Lab Mt Julliet Tennessee https://boutiquefilmlab.com/ or National Photo 1404 B Reisterstown Rd Pikesville, MD 21208 nationalphoto.com TERMS: We do not replace or offer refunds on film once purchased. There are so many factors that may create unsatisfactory results - your handling, vintage camera failure or lab/home processing error – we cannot be held responsible for the outcome and do not offer replacement rolls or refunds. Why can't I process this film at my favorite C-41 lab? - Kodak's color motion picture films have an additional layer (on the shiny, not the emulsion side) called a "Rem Jet". Although technically this film can be processed C-41, this Rem Jet will foul commercial lab's equipment and there for can not be commercially processed. DO NOT BRING THIS FILM to a commercial lab or think you can "slip it through" - it will severely mess up their machines!!!! What commercial lab will process my negs, scan and or print for me? - See links above. How do I process this film at home with FPP's ECN-2 Kit? In addition to the normal directions for home-processing please add the following step. After your last step, rinse your film in a half bucket of hot water (80 - 102 degrees F). With your thumb, gently rub the non-emulsion side of your film as you remove it from your film reel. Careful not to scratch the emulsion side of your film. Final rinse under running water. You will see the black rem jet in your water as you rinse. That's it! Hang your film to dry and then scan! Enjoy!!!