Supermicro Vintage 1"x1" Domed Case Badge / Sticker Logo
DescriptionOne (1) domed, self-adhesive sticker badge bubble-domed for 3D appearance. Perfect for decorating your equipment case.SpecificationsLogo: Supermicro Vintage Type: Domed badge / sticker Quantity: 1 (one) Dimensions (inches): 1 inch by 1 inch square Dimensions (millimeters): 25.4 millimeters by 25.4 millimeters square Dimensions (centimeters): 2.54 centimeters by 2.54 centimeters square Application GuidelinesThis Supermicro Vintage logo badge is self-adhesive and can be attached to a flat or slightly curved, clean and smooth surface. For best results, clean the target surface with rubbing alcohol and let it dry completely. Then simply peel the Supermicro Vintage logo badge from its backing sheet and attach it to the target area by firmly pressing it in place. Pressure-sensitive adhesive starts to work when the label is pressed against the application surface and achieves full strength within 24-48 hours. Do not remove the Supermicro Vintage logo badge once applied as this will weaken adhesion when re-applied and the use of an additional adhesive (not included) may be needed to re-apply the badge. While the vast majority of users this is a non-issue, for some textured, oily, dirty, or otherwise low energy surfaces additional adhesive (not included with the product) may be required, therefore adhesion to all surfaces is not guaranteed for this product. This Supermicro Vintage logo sticker badge is intended for indoor use only and should not be exposed to the elements for a prolonged time.