The Stinger - Drill-Mounted Polishing Cone

GLOSS THE GAPS. The Stinger is a drill-mounted polishing cone for the tight, intricate spots a full-size polisher will never touch — exhaust tips, intricate wheels, lug nuts, and other detailed areas on the vehicle or the wheel. It comes as a two-pack: an orange correcting foam for cutting heavier defects and a black finishing foam for refining and finishing lighter marks. Drill-mounted cone: Chuck it into your drill to reach curves and recesses a polisher can't, on both vehicle and wheel. Two foams included: Orange correcting foam for more aggressive cutting; black finishing foam for finishing and lighter defects. Correct-then-finish workflow: Cut with the orange, then refine with the black for the best results. Made for tight, intricate areas: Exhaust tips, intricate wheel spokes, lug nuts, and other detailed spots. Usage note: Keep your drill speed controlled and let the foam and product do the work; too much speed or pressure builds heat. How to Use Correcting (Orange Foam) Mount the orange cone in your drill. Apply a few dabs of Cloud 9 Metal Polish (or your correcting compound) to the foam. Work the area at a controlled speed with light, steady pressure until the defects clear. Wipe the residue with a clean microfiber towel. Finishing (Black Foam) Swap to the black finishing cone. Apply a small amount of Cloud Nine metal polish or finishing polish. Refine the same area at a controlled speed to bring back gloss. Wipe clean and inspect. Detailer Tips Start with the least aggressive combo that works, and test a small spot before committing to the whole area. Keep the cone moving — parking it in one spot builds heat fast on small parts. Pair with our Cloud 9 Metal Polish for chrome and stainless exhaust tips, lug nuts, and other bare-metal work. Pairs with Cherry Bomb (the ball version) for rounded areas like the inside of exhaust tips.