1/4" Dr. Titanium & Superalloy X Set (PREORDER)

WORLD'S FASTEST RATCHET. The lightest, tightest‑fitting sockets. Made from Certified Aerospace Superalloy and 100% rust-proof Titanium. A limited production of 10 Total Sets. ALSO AVAILABLE AS A 5PC SET (TITANIUM ONLY) Multiple world record holder. Designed to be the benchmark for fully functional tools at the lightest possible weight. We ended up with some new records in the process. Here's a few of them: The worlds smoothest & fastest ratchet. Capable of ratcheting 2X faster than standard ones. Lightest functional toolset – ½ the weight of normal sets. Tightest fitment – Sockets lock onto fasteners with next to zero play. And because Titanium never rusts, these tools are built for a lifetime (or two...). *ESTIMATED SHIP DATE: DEC. 2026* TOOLS/MATERIALS INCLUDED: The centerpiece of this set is the Titanium Superleggera Ratchet. Two features make it smoother & ratchet faster than anything on the market: Incredibly Smooth gear mechanism (lowest back‑drag ever) Ultralight Handle (massive reduction in inertia) The result: With 80% less rotational resistance than normal, your energy goes further: Swing normally and enjoy feather-light ratcheting or go full speed and turn screws twice as fast - your choice. No other ratchet can physically come close. TRO Titanium & Superalloy Socket Set Features: EFFORTLESSLY SMOOTH. We've ruthlessly stripped excess weight and mechanism friction, leading to an effortless swing and unmatched ratcheting speeds. The Smoothest Mechanism on the Planet With a backdrag torque of just 0.5 in-oz (36 g-cm), our ratchet is in a class of its own. Polished and DLC coated Gear Reduces friction even further and provides a hard-wearing surface. A first in hand tools. Smooth is Fast A standard ratchet wastes 5× more torque to internal drag and has 4.8× more handle inertia than the Superleggera. With less resistance holding you back, you can tighten screws in nearly half the time. Built-in Smoothness Our baseline freewheeling smoothness is levels above existing ratchets - in the demo below, pawls and springs are removed to show the contribution of the gear-only friction. Less Inertia, More Control With such low resistance to motion, this ratchet responds instantly and stops on a dime. SUPERALLOY SUPER STRENGTH. Our Hex Bit Holder, 1/4" - 3/8" Adapter & Extension are machined from a Superalloy that's 2–3 times stronger than typical Cr‑V or Cr‑Mo steels. The same alloy used in jet engines and landing gear. Certified flight hardware material in your hand. Smaller. Lighter. Stronger. This exceptional strength, combined with the tightest clearances on the market, enables our radical yet robust lightweight designs. Dual-Function The extension also acts as a perfectly fitting cheater pipe when inserted into the ratchet handle. Extra reach & leverage on deck. Twist-free Torque Inspired by fluted precision rifle barrels, our extension has 50% greater torsional rigidity than standard extensions for a direct, twist-free feel. Built to Aerospace Standards This isn't "aerospace grade" marketing BS. Our Superalloy material conforms to the following specifications: Mil-Spec Defense Federal Acquisition Regulation Supplement (DFARS) Aerospace Material Specifications (AMS) (3x) GE Aviation Standards. Tougher than the Average Crank most tool steels to peak hardness and they become brittle. VIM+VAR refining ensures our Superalloy has exceptional fracture toughness. It's a unique alloy combining both Ultra High Strength AND Toughness. ULTRALIGHT. Titanium has steel‑like strength at just 56% of the weight. Our optimized geometry further exploits Titanium's strength‑to‑weight ratio. The Superleggera is nearly full Ti Alloy. Less work to use This is the world’s lightest 1/4" ratchet (without torque limitations). At just 52 g (1.8 oz), every motion feels effortless. It's lighter than some bit ratchets! Freedom of Ultralight Tools At 125 g (4.4 oz) total for the entire kit, you can carry a full tool set with you at the same weight as 1 normal ratchet - or use the freed-up weight for more equipment. Proven Durability Refined via Finite Element Analysis and 3rd-party tested to a maximum failure torque of over 73 ft-lbs (99 Nm), far exceeding the demands of normal 1/4" drive use. ENGINEERED FOR THE ULTIMATE FIT. Experience the absolute tightest fitment on fasteners, reducing stress and preventing rounding. Exceptionally tight clearances. Sockets and drives machined to exceptionally tight tolerances for a near-perfect fit. TRO Titanium Plug Socket image shown for example: Zero Play = more surface engagement means less stress on both the tool & fastener. They're also less prone to marring delicate fasteners. CUSTOMIZABLE HIGH-PERFORMANCE COATINGS. Choose a coating that matches your style and performance needs. Several high performance PVD Coatings Offered: Standard Charcoal DLC is our recommendation. It combines the best combination of wear resistance, low friction, price and coating adhesion/coverage/surface roughness. COATING SURFACE HARDNESS (VICKERS) THICKNESS (μm) FRICTION COEF. UNCOATED TITANIUM 400 0.4 UNCOATED SUPERALLOY 550 - CHROME PLATING (FOR COMPARISON) 950 20-40 0.2 DLC (CHARCOAL) 1600 3 0.1-0.2 TiN (GOLD) 3000 3 0.6 CrN (DARK IRIDESCENT) 3000 7 0.5 AlCrN (BLUE-GRAY) 4490 5 0.35 DLC (IRIDESCENT) 6600 0.3 <0.1 All custom-machined titanium Torx fasteners are finished in a matching coating. METICULOUS FINISHING TOUCHES. Meticulously hand finished. Far beyond your average production-line tool. Optional WPC + Cryogenic Treatment These combined treatments maximize the surface hardness (wear resistance) and reduce friction to the minimum. Leaves a unique matte surface finish. **FOR CHARCOAL DLC & GOLD TiN COATINGS** - WPC Treatment is a "micro shot peening" process that originated in Japan. The process involves bombarding the metal surface with extremely hard, fine particles at near-sonic speeds. This creates micro dimples on the surface which leave a hardened outer surface with high compressive stress - this reduces crack propagation and therefore increases fatigue life. The surface is left very smooth with a lowered coefficient of friction due to the micro dimples. - CryoHeat Deep Cryogenic Treatment (DCT) uses liquid nitrogen to take the material temperature down to -196°C and is held for 18 to 48 hours. Many steel and Titanium alloys see large increases in fatigue strength and surface hardness due to grain refinement and conversion of Austenite to the harder Martensite. The set arrives in a Pelican waterproof hard case, lined with precision machined 2 tone shadow foam for secure storage and a stunning presentation. LIST OF WORLD'S BEST FEATURES: (1X) SUPERLEGGERA RATCHET - The lowest backdrag mechanism - Highest failure torque to weight ratio - Corrosion-proof Titanium alloy body - Fastest ratcheting speeds (1X) SUPERALLOY 100 mm 1/4" DRIVE EXTENSION: - Highest strength alloy used in consumer hand tools - Stiffest extension available - Tightest fitment on male square drive - Tightest fitment on external hexagon drive (1X) SUPERALLOY 1/4" HEX BIT HOLDER: - Highest strength alloy used in consumer hand tools - Lightest Bit Holder for High Torque usage - Tightest fitment on hex bits - Tightest fitment on external hexagon drive (4X) TITANIUM 1/4" DRIVE SOCKETS: - Lightest sockets on the market - Corrosion-proof Titanium alloy body - Tightest fitment on hex head fasteners - Tightest fitment on external hexagon drive