Sized for a Larger Frame, With the Back and Legs on Separate Motors The Grande is a dual-motor lift chair rated to 250 kg, built around a 73 cm seat — wide enough that a larger person sits in the chair rather than wedged between the arms. Because it runs two motors instead of one, the backrest and the leg rest move independently: feet up while you stay sitting upright, or the back dropped without your knees rising to meet it. The seat also tilts forward under power to bring you to your feet, and takes your weight on the way back down. Key Features Rated to 250 kg — a bariatric-tier safe working load. Standard riser recliners are commonly built to somewhere between about 130 and 160 kg. 73 cm seat width — measured across the seating area, so the arms stay where you can reach them rather than pressing in on you. 55 cm seat depth — measured with the leg rest closed. Two motors, not one — backrest and leg rest run on separate actuators, so each moves on its own. Powered lift and lower — the seat tips forward to bring you to standing, and the same motion lowers you back into the chair under control. One Motor or Two, and Why the Seat Measurements Decide More Than Either A single-motor chair drives the backrest and the leg rest from one actuator along a linked path. Recline the back and the legs come up with it, whether you wanted them to or not, and the chair steps through a fixed sequence rather than stopping wherever suits you. A dual-motor chair splits that into two circuits, so back and legs are independent. Day to day that is the difference between sitting upright with your feet raised while you eat or read, and having to lie back to get your legs up at all. It usually opens a deeper recline as well, because the two movements are no longer sharing one path. The honest trade-off: two motors means more buttons on the handset. If the person using the chair finds controls awkward, test that in the showroom rather than discover it at home. The number most people fixate on is the weight rating, but the measurement that actually decides whether a lift chair works is the seat. Too narrow and you lose the armrests, which are what you push down on to stand. Too deep and you cannot get your back against the backrest without your feet lifting off the floor — and feet off the floor is precisely the position that makes standing hardest, which defeats the point of the chair. A capacity rating is not a badge bolted onto an ordinary frame either: a chair built to carry 250 kg has a reinforced frame and a heavier lift mechanism underneath it, and the seat is generally widened to sit over that structure. The Grande is built broad rather than long — 73 cm across against a 55 cm depth — so a wider person is well served, while a very tall person should measure their own seated thigh length and back height against it before deciding. Product Details Type Lift chair — powered lift and recline Motors Two — backrest and leg rest, independently controlled Rated capacity 250 kg safe working load Seat width 73 cm Seat depth 55 cm, leg rest closed Before You Buy Ask us the seat height from the floor. This is the measurement that decides whether the chair suits you. Sitting with your feet flat and your knees at roughly a right angle is what makes standing straightforward — bring the shoes you actually wear and try it. Ask whether it has battery backup. If the power goes out while the chair is reclined, a backup battery is what returns it upright. Worth knowing before you need it. Ask what the leg rest is rated to on its own. On many lift chairs the leg rest carries a separate and much lower limit than the chair as a whole. Ask for the overall footprint and the clearance it needs behind it when fully reclined, and check that against the wall or window you plan to put it against. Ask about warranty, and who services it in WA — the term, what it covers, and whether a technician comes to your home or the chair has to go back. Ask about delivery and access. This is a two-person item with a steel lift mechanism inside it. Measure your doorways and any turns in the hallway first. Ask whether it can be supplied under a funding arrangement such as a Home Care Package, NDIS plan or DVA entitlement — we will tell you plainly what we can and cannot do. Try It at Beds4U A lift chair is fitted rather than simply bought. Seat width, seat depth and seat height all have to suit one particular body, and no photograph or spec table will tell you whether this one suits yours. Come in and sit in it properly — run the back and the legs separately, take it all the way up to standing, and sit in it long enough to know. Call your nearest store first and we will tell you which of our WA showrooms has one on the floor, so you are not making the trip for nothing.